Deployment of distributed energy resources (DERs) introduces more dynamics to the distribution system, and brings system operators more challenges in monitoring and controlling the distribution system. These challenges can be addressed by developing methods for real time extraction of the operating state and model of the system, that is advanced state estimators for distribution systems with high penetration of DERs. This paper presents an object-oriented Distributed Quasi-Dynamic State Estimator (DQDSE) that employs three-phase detailed models and enables data from sensors to be streamed and used by the DQDSE. Based on three-phase detailed quasi-dynamic models that track slow dynamics (e.g., controls of power electronics, electromechanical transients of motors, etc.), DQDSE forms network measurement model by using network-wise measurements, performs quasi-dynamic state estimation, and provides the best estimate of the distribution system states. The proposed DQDSE has the following advantages: (1) detailed modeling approach ensures accurate results even when accommodating unbalanced and asymmetric systems; (2) the measurement set of DQDSE contains measurements from sensors as well as other measurement types to increase redundancy; (3) the distributed architecture of DQDSE enables fast data processing. The paper presents the method via an illustrative example that substantiates the effectiveness of DQDSE.
12 February 2021 in IEEE Transactions on Smart Grid
Optimal power flow (OPF) has always played an important role in optimizing the operation of power systems, which are complex and highly nonlinear networks. The need for optimization is even more pressing in modern power grids with distributed energy resources (DERs, with or without storage) that introduce more flexibility, dynamics, and uncertainties to power grids. Most importantly, they add the time dimension to the optimization process: DERs generate the need to optimize systems in real time over a time horizon considering forecasts. This article proposes a multi-stage OPF formulation and solution method based on object-oriented device models with a rolling horizon incorporated for real-time optimizations to achieve optimal feedback control. The process also takes into account changing forecasts. The proposed approach is tested on a real distribution feeder and the results indicate that the method is very promising.
The introduction of new data acquisition systems, i.e., merging units, provides more accurate data to protection schemes enabling faster and more reliable protection. This paper presents an object-oriented dynamic state estimation based protection (DSEBP) scheme on a protection unit using the measurements obtained from merging units. The DSEBP uses instantaneous measurements and adopts a detailed and object-oriented model that represents the protection zone, which may comprise two or more devices, and performs dynamic state estimation to determine whether an internal fault has occurred. The dynamic state estimation provides the best estimate of the protection zone states as well as the probability that the un-faulted protection zone model fits the measurements. When the probability drops below a certain threshold, a trip decision is issued with a user selected time delay. The DSEBP requires few settings (e.g., trip delay time, etc.) and is applicable to any combination of devices in the protection zone. This paper uses an example consisting of a transformer and a cable in a substation to substantiate the effectiveness of this method.
This paper proposes a fast and generalized multiobjective design optimization method for the synchronous reluctance machines (SynRMs). The novel analytical model, based on the Maxwell's equations and assisted by a magnetic equivalent circuit (MEC), is adopted in order to calculate the essential performance indices (PIs) including the average torque, torque density and efficiency. The proposed model prevails over the prevalent finite element analysis (FEA) in terms of calculation speed, while maintains the accuracy of the calculation results. The multi-objective particle swarm optimization (PSO) and the differential evolution (DE) algorithms are both applied to find the Pareto front. Influences on the Pareto front caused by the parameters in the algorithms are also discussed. Two optimal designs are chosen from the Pareto front for further validation through FEA simulation. The proposed optimal design method is capable of finding the optimized SynRM designs subject to various design requirements and is able to accelerate the entire optimization process.
Line-commutated converters (LCCs) are significant components of conventional high-voltage direct current (HVDC) transmission systems and distributed energy resources. Various simulation methods have been developed to model LCCs under different operational conditions. To alleviate the computational burden and realize real-time simulation, the dynamic phasor model based on generalized averaging method was established for LCCs. However, the complexity of the analytical switching function limits the flexibility of utilizing the model in different situation and there is room for improvement on accuracy. This paper derives a more accurate expression for current switching function and a more extensive expression for voltage switching function for LCC modeling. The model is developed in quasi-dynamic domain and is transformed into an algebraic quadratic companion form. A simple example system is utilized to show the accuracy of the model and a large example system is utilized to demonstrate the performance of the model under transient conditions.
Increasing solar energy penetrations may create challenges for distribution system operations because production variability can lead to large voltage deviations or protection system miscoordination. Instituting advanced management systems on distribution systems is one promising method for combating these challenges by intelligently controlling distribution assets to regulate voltage and ensure protection safety margins. While it is generally not the case today, greater deployment of power system sensors and interoperable distributed energy resources (DER)e.g., photovoltaic (PV) inverters, energy storage systems (ESS), electric vehicles (EVs)will enable situational awareness, control, and optimization of distribution systems. In this work, a control system was created which measures power system parameters to estimate the status of a feeder, forecasts the distribution state over a short-term horizon, and issues optimal set point commands to distribution-connected equipment to regulate voltage and protect the system. This two-year project integrated multiple research innovations into a management system designed to safely allow PV penetrations of 50% or greater. The integrated software was demonstrated through extensive real-time (RT) and power hardware-in-the-loop studies and a field demonstration on a live power system with a 684 kVA PV system.