1 February 2024 in Journal of Laser Applications
The growing prominence of the electric vehicle industry, fueled by environmental concerns, has demanded innovation in various aspects of battery technologies with special emphasis on increasing the efficiency of both electric storage and its retrieval. An unexplored area of this is to identify the possibilities and limits of laser soldering. Here, we reveal the effects of surface pretreatment conditions and the amount of filler, along with the laser power and irradiation time on the characteristics of laser-soldered joints, by simultaneously evaluating the electrical and mechanical behavior of laser-soldered nickel-plated steel sheets (Hilumin®). By describing the morphological characteristics of the resolidified solder and the electrical and mechanical properties of the joints, we identify three, characteristically different morphological appearances and highlight the optimal one, where uniform and mostly void-free solder can be produced. Furthermore, we report a correlation between the threshold of upper sheet melting (either expressed as laser power or irradiation time) and joint deterioration in terms of the electrical and mechanical properties of the joint. We conclude that laser soldering can create joints with outstanding electrical conductance and adequate mechanical stability that meets the critical specifications of battery joining technologies when the surface pretreatment condition and processing parameters are properly optimized.
5 April 2023 in Journal of Laser Applications
Nowadays, lasers are routine tools in the widest range of materials processing, including welding of battery packs. The properties of the laser generated weld bead are crucial in determining the electrical and mechanical behavior of the joint. Here, we report on the identification of five morphological bead types, namely, Rosenthal, single wave, elongated, pre-humping, and humping morphologies and their systematic appearance over the laser power versus scanning speed plane. We prove that each type exhibits characteristic electrical and mechanical behavior that differ not only in the magnitude of relevant materials’ properties, but also in their variability. We show for nickel-coated steel and uncoated DC01 cold rolled steel that the so-called single wave morphology is best suited for battery welding applications, since this morphology class concomitantly exhibits the lowest electrical resistance and the highest mechanical strength, both with a relatively small margin of error. The results suggest that the bead morphology could be exploited as a simple indicator of joint properties.