Sreyam Sinha

Sreyam Sinha

Auto-generated profile, based on publicly available information

Sreyam Sinha

Department of Electrical and Computer Engineering, Cornell University, NY 14853 USA

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 July 2019 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
SSSreyam Sinha
Sreyam Sinha
AKAshish Kumar
Ashish Kumar
BRBrandon Regensburger
Brandon Regensburger
KAKhurram K. Afridi
Khurram K. Afridi
This paper introduces a new design approach to mitigate the effect of parasitic capacitances and achieve high performance in large air-gap capacitive wireless power transfer (WPT) systems for electric vehicle (EV) charging. In a capacitive WPT system for EVs, the vehicle chassis and roadway introduce multiple parasitic capacitances that can overwhelm the coupling capacitance and severely degrade power transfer and efficiency. The proposed approach addresses this challenge by employing split-inductor matching networks, which allow the complex network of parasitic capacitances to be simplified into an equivalent four-capacitance model. The shunt capacitances of this model are directly utilized as the matching network capacitors, hence, absorbing the parasitic capacitances and eliminating the need for discrete high-voltage capacitors. A systematic procedure is developed to accurately measure the equivalent capacitances of the model, enabling the system’s performance to be reliably predicted. The proposed approach is used to design two 6.78-MHz 12-cm air-gap prototype capacitive WPT systems with capacitor-free matching networks. The first system transfers up to 590 W using 150 cm2 square coupling plates, and achieves an efficiency of 88.4%. The second prototype system transfers up to 1217 W using 118 cm2 circular coupling plates, achieving a power transfer density of 51.6 kW/m2. The measured output power profiles of the two systems match well with their predicted counterparts, validating the proposed design approach.

13 October 2020 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Verified
Journal Article
Closed access
BRBrandon Regensburger
Brandon Regensburger
SSSreyam Sinha
Sreyam Sinha
AKAshish Kumar
Ashish Kumar
SMSounak Maji
Sounak Maji
KAKhurram K. Afridi
Khurram K. Afridi
This paper introduces a kilowatt-scale large air-gap capacitive wireless power transfer (WPT) system for electric vehicle (EV) charging that achieves high power transfer density and high efficiency. High power transfer density is achieved by operating at a multi-MHz frequency (13.56 MHz), and by utilizing innovatively designed matching networks that enable effective power transfer by providing gain and reactive compensation while absorbing the parasitics present in the EV charging environment. High efficiency is achieved through the use of new interleaved-foil air-core coupled inductors in the matching networks. Interleaved-foil inductors provide a better tradeoff between quality factor, size and self-resonant frequency compared to conventional solenoidal inductors, making them suitable for compactly and efficiently processing kilowatt-scale power at multi-MHz frequencies. Two variants of the interleaved-foil concept are presented: a semi-toroidal interleaved foil (STIF) inductor and a toroidal interleaved-foil (TIF) inductor. The superior performance of interleaved-foil inductors is demonstrated using analytical formulations, which are validated through finite-element analysis and measurements. Compared to the highest-quality-factor solenoidal inductor, the STIF inductor is shown to achieve 32% smaller box volume while having only 3% lower measured quality factor, while the TIF inductor is shown to achieve an even better tradeoff with 27% smaller box volume and 30% higher measured quality factor. A 13.56-MHz, 12-cm air-gap prototype capacitive WPT system utilizing TIF inductors with a quality factor of 2055 in its matching networks is designed, built and tested. This system achieves record-breaking performance for a capacitive EV charging system, with an efficiency of 94.7% while transferring 3.75 kW using 22-cm diameter coupling plates, corresponding to a power transfer density of 49.4 kW/m2. This TIF-inductor based prototype is also shown to outperform a second high-performance prototype utilizing STIF inductors.

10 September 2020 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Verified
Journal Article
Closed access
SSSreyam Sinha
Sreyam Sinha
AKAshish Kumar
Ashish Kumar
BRBrandon Regensburger
Brandon Regensburger
KAKhurram K. Afridi
Khurram K. Afridi
Matching networks are an efficient means of providing large voltage or current gain and reactive compensation in high-frequency wireless power transfer (WPT) systems. This paper introduces an analytical optimization approach for the design of L-section matching networks in capacitive WPT systems, which maximizes the network efficiency while achieving the required overall gain and compensation. The proposed approach identifies the optimal number of matching network stages, and the optimal distribution of gains and compensations among these stages. Compared to the conventional approach to designing matching networks for capacitive WPT systems, the proposed approach results in a higher and flatter efficiency for a wide range of air-gap voltages. The proposed approach also offers a better trade-off between efficiency and power transfer density, while meeting electric field safety requirements. The efficiency predictions of the proposed design approach are experimentally validated using three 6.78-MHz 100-W prototype capacitive WPT systems, one with single-stage matching networks, one with two-stage matching networks, and another with three-stage matching networks. The measured matching network efficiencies of the prototype systems are in close agreement with the theoretical predictions. The prototype system with two-stage matching networks is also compared with a prototype system designed using the conventional approach, and is shown to achieve significantly higher efficiency.

13 December 2019 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Verified
Journal Article
Closed access
SSSreyam Sinha
Sreyam Sinha
AKAshish Kumar
Ashish Kumar
BRBrandon Regensburger
Brandon Regensburger
KAKhurram K. Afridi
Khurram K. Afridi
This article introduces a new approach to compensate for coupling variations in wireless power transfer (WPT) systems by utilizing an active variable reactance (AVR) rectifier. The AVR rectifier operates at a fixed frequency and incorporates a power-splitting resonant network. By controlling the ratio of the split powers in its branches, the AVR rectifier continuously compensates for large misalignments and distance variations between couplers, while maintaining full power transfer. A comprehensive methodology is presented that maximizes the tolerable range of misalignments in an AVR-rectifier-enabled capacitive WPT system while meeting efficiency targets. The proposed approach is validated using a 13.56-MHz, 300-W, 12-cm nominal air-gap prototype capacitive WPT system, which incorporates an AVR rectifier and can be scaled up in power for dynamic electric vehicle (EV) charging applications. The prototype system maintains full power transfer for up to 45% lateral misalignment in the coupler and up to 45% increase in the vehicle’s road clearance. In a dynamic EV charging scenario, the AVR-rectifier-enabled system transfers 80% more energy during a single pass of the vehicle over the charging pad, as compared to a system without the AVR rectifier. The measured performance of the prototype system is in good agreement with predictions.

1 June 2021
Verified
Conference Paper
Closed access
SSSreyam Sinha
Sreyam Sinha
Ashish KumarAshish Kumar
Ashish Kumar
KAKhurram K. Afridi
Khurram K. Afridi
This paper introduces an analytical approach to optimize the design of immittance matching networks that provide gain and reactive compensation in capacitive wireless power transfer (WPT) systems while maintaining load-independent output current. The proposed approach maximizes the matching network efficiency by identifying the optimal number of matching network stages, and by optimally distributing the overall gain among these stages. Compared to the conventional approach to designing immittance matching networks in capacitive WPT systems, the proposed approach is shown to achieve 82% smaller losses. A 6.78-MHz capacitive WPT prototype utilizing immittance matching networks is designed and built, and the measured network efficiency is shown to match well with analytical predictions.

2 November 2021
Verified
Conference Paper
Closed access
FGFirehiwot Gurara
Firehiwot Gurara
SSSreyam Sinha
Sreyam Sinha
RMRabail Makhdoom
Rabail Makhdoom
LKLingcheng Kong
Lingcheng Kong
ZTZhiting Tian
Zhiting Tian
KAKhurram K. Afridi
Khurram K. Afridi
This paper introduces a multi-mode four-switch buck-boost derived dc-dc converter designed for processing power produced from waste heat using thermoelectric generators (TEGs). TEGs comprise semiconductor thermocouples which generate electricity when exposed to a temperature gradient. Depending on this temperature gradient, TEGs can generate a wide range of voltages. The proposed converter needs to convert this wide range of voltage and deliver power to both 3.7 V Lithiumion battery and 5 V loads. Thus, a multi-mode power converter with four operational modes, buck, boost, buck with boost in passthrough, and buck and boost, is proposed. The implementation of the gate drive circuitry for a back-to-back switch configuration used for controlling the state of charge of the battery and providing short-circuit protection is discussed. The design and optimization of the magnetics considering all modes of operation is also presented. A 50-W prototype converter designed for input voltage range of 5-15 V from the TEGs is designed, built, and tested. The prototype multi-mode converter achieves a peak efficiency of 98.15%.