A structural optimization method for spoke single-layer cable-net structures based on an improved genetic algorithm (GA) is proposed. The three-cable coplanarity theory is introduced, and an exchange program between a proprietary programming language and an advanced finite-element software is presented to implement the improved GA. Then, a simplified numerical model of the Suzhou Industrial Park Stadium cable-net structure is built and optimized. The numerical example shows that the proposed structural optimization method is accurate and efficient. Because of the limited loading combinations, nodal vertical displacements, and tensile stresses of cables, the optimal coordinates of support nodes and cable nodes and subsequently, the initial pretension and cross-sectional areas of cables, are obtained. When the -coordinate distribution curve of the support nodes behaves smoothly, the material property of the cables will be fully utilized with a reduction in cable weight. For the optimal mode of the simplified model, the elevations of the support nodes provide the entire cable-net structure a saddle shape, which behaves rigidly under out-of-plane loads. The proposed method can be extended to solve optimization problems of similar cable-net structures.
New precast concrete (NPC) shear wall consists of upper and lower prefabricated wall panels connected with reservation connection reinforcements inserted in the reserved galvanized metal bellows with full grout. The accomplished test results have demonstrated that the force mechanism of NPC shear wall is significantly different from that of traditional cast-in-situ concrete shear wall. To grasp the seismic performance of NPC shear wall, nonlinear numerical model, which was based on the test results, was established to investigate the influence of axial compression ratio, stirrup ratio of the shear wall, concealed column, diameter and amount of connection reinforcements and anchorage length of connection reinforcements on the model's curve of shear force vs. displacement of the load point. The seismic performance was evaluated from aspects of strength and deformability. The analysis results show that axial compression ratio and amount of connection reinforcements are sensitive parameters to the ultimate force and all the parameters concerned are influential to the ultimate displacement. The effect of axial compression ratio is complicated and increased amount of connection reinforcements can obviously enhance the capacity of NPC shear wall. Based on the findings, simplified calculation formula of shear resistance capacity was presented, and its applicability was confirmed by comparing the calculation results with testing results and nonlinear analysis results.
8 November 2016 in Advances in Materials Science and Engineering
This paper proposed a hybrid precast concrete shear wall emulating monolithic construction (HPWEM) that utilized grouted vertical connecting reinforcements and unbonded posttensioned high-strength strands across the horizontal joint for the lateral resistance. The grouted reinforcements with predetermined debond length were used to provide strength by tension and energy dissipation by yielding. The posttensioned strands were mainly employed to offer the restoring force to reduce the residual displacement by elastic extension. The overlapping welded closed stirrups improved the confinement property of the restrained concrete, avoiding the brittle failure. Six HPWEM specimens, considering variables including the amounts of strands and the debond lengths of grouted reinforcements, as well as one referenced cast-in-place monolithic wall specimen, were tested under the low-cycle reversed lateral load. The HPWEM specimens were capable of providing strength, stiffness, ductility, and energy dissipation equivalent to that of the monolithic wall specimen under certain variable condition.