28 April 2023 in IEEE Transactions on Antennas and Propagation
A circularly polarized (CP) metasurface-inspired antenna array with low radar cross section (RCS) over a wideband based on polarization conversion metasurface (PCM) is proposed. Without increasing the structural complexity, the PCM units serve directly as antenna radiators, which not only maintains good radiation characteristics but also reduces both the in-band and out-of-band RCS of the antenna. Simulations show that the proposed PCM-inspired antenna array has an impedance bandwidth of 37.6% (8.2 to 12 GHz), a 3 dB axial ratio (AR) bandwidth of 32.5% (8.5 to 11.8 GHz), and a 3 dB gain bandwidth of 23.3% (9.5 to 12 GHz). The RCS of the proposed antenna array is greatly reduced for both polarizations in the frequency range of 7.6 to 16.2 GHz (72.3%) compared to conventional microstrip patch antenna array, with a maximum reduction of 20.6 dB. Moreover, the proposed PCM-inspired antenna array has a smaller element size compared to conventional low-RCS metasurface antennas, making it more conducive to the composition of a phased array. Finally, the proposed array is fabricated and measured, and the results confirm the simulations.
7 April 2022 in IEEE Transactions on Antennas and Propagation
A wideband low radar cross-section (RCS) circularly polarized (CP) reconfigurable patch antenna array based on liquid metal (LM) has been proposed in this article. The array was formed by $4\,{\times }\,4$ CP C-shaped antenna elements fed with a sequential feeding network. The antenna element was designed with a pair of narrow slots, and a microchannel adhered to the top metal layer. The CP reconfiguration depends on the tuning of the slots by moving the LM in the channel. The patch antenna array can obtain good CP radiation and low RCS features without any extra RCS reduction structures other than the array elements. RCS reduction (RCSR) can be realized by $180^{\circ }\,{\pm }\,37^{\circ }$ reflection phase variations between two different antenna elements under normal incidence for both $x$ - and $y$ -polarizations. The antenna prototype has been fabricated and measured. The measured results show good agreement with simulated results.
12 January 2024 in IEEE Transactions on Antennas and Propagation
In this paper, a broadband low radar cross section (RCS) circularly polarized (CP) antenna array with reconfigurable scattering patterns is proposed. The antenna array comprises sixteen reconfigurable elements and a phase reconfigurable power divider. The antenna element can switch between two scattering states by controlling the states of the p-i-n diodes, which differ by 180° in reflection phase. In addition, the polarization of the antenna element remains the same in both states but exhibits a 90° phase difference. To compensate for the radiation phase difference, a phase reconfigurable power divider based on p-i-n diodes is designed, which can switch between 90° and 0° transmission phases. By controlling the states of the antenna elements and the output phase of the power divider, the antenna array can be switched among different scattering patterns while maintaining stable right-hand circularly polarized (RHCP) performance. Simulation results demonstrate a 10 dB reduction in the in-band RCS for the antenna array within the 8.2–11 GHz range under normal incidence. The array maintains good CP radiation performance in the 7.7–11.1 GHz frequency band. The measured results exhibit strong concurrence with the simulation results, confirming the good performance of the proposed antenna array.
30 September 2026 in Advanced Materials Technologies
Aerostats, operating persistently in near‐space, have garnered attention in remote sensing, communication relay, and disaster monitoring applications. Integrating large‐area conformal antenna arrays onto their envelope surfaces can enhance electromagnetic functionality while reducing the aerodynamic and structural penalties of externally mounted rigid antennas. However, deformation of the flexible envelope may alter the antennas’ geometry, input matching, and radiation characteristics. A deformation‐tolerant flexible conformal antenna array for near‐space aerostats is developed and mechanically and electromagnetically characterized under wind loading, cyclic bending, controlled curvature, and aerostat inflation. The sixteen‐element antenna array is integrated onto four aerostat models (scale, dolphin‐shaped, jellyfish‐shaped, and disc‐shaped). Across the four platforms, the largest within‐platform variation in measured |S 11 | among the tested inflation states is 1.12 dB. Radiation‐pattern measurements reveal configuration‐dependent changes in gain, sidelobe level, and half‐power beamwidth after platform integration. Ground and low‐altitude flight tests demonstrate orientation‐dependent microwave signal reception, showing the potential of the array for near‐space communication and directional microwave sensing.
1 November 2026 in IEEE Transactions on Antennas and Propagation