Ultra-high-speed permanent magnet synchronous motors (PMSMs) have been widely applied in aerospace, advanced manufacturing, and consumer products due to their small size, high reliability, and high-power density. As the rotational speed increases, losses, cooling requirements, excitation forces, bearing losses, and noise characteristics of the motor are significantly different from those of conventional motors. To minimize iron losses and improve efficiency, ultra-high-speed motors typically employ a low pole count configuration, exemplified by the prevalent 2-pole 3-slot (2P3S) design. In 2-pole machines, low-order electromagnetic excitation forces may cause significant electromagnetic vibration and noise. Reducing electromagnetic noise, especially the two-times mechanical rotational frequency (2f) noise in 2P3S motors, is critical. Therefore, the noise reduction strategies for a 120,000 rpm PMSM are investigated. First, the electromagnetic excitation frequencies and magnitudes of the motor are analyzed. Through changing the pole-slot configuration (such as transitioning from 2P3S to 2P6S), the unbalanced magnetic pull (UMP) in the original 2P3S design is eliminated, significantly reducing the main source of vibration. Then, the impact of the stator assembly gap on electromagnetic excitation is examined using a segmented stator structure. Effective control of this assembly gap further reduces the electromagnetic noise of the motor. Finally, experimental tests demonstrate a significant noise reduction in the 2f frequency band, with a sound pressure level reduction of about 9 dB. The reduction validates the effectiveness of this pole-slot optimization and stator assembly gap control strategies.