16 June 2018 in Fracture and Structural Integrity
This paper presents an application of the boundary element method to the analysis of crack growth problems in linear elastic fracture mechanics and the correlation of results with experimental data. The methodology consists of computing stress intensity factors (SIFs), the crack growth path and the estimation of fatigue life, via an incremental analysis of the crack extension, considering two independent boundary integral equations, the displacement and traction integral equations. Moreover, a special purpose educational program for simulating two-dimensional crack growth based on the dual boundary element method (DBEM), named BemCracker2D, written in C++ with a MATLAB graphic user interface, has been developed and used to verify the adopted methodology. The numerical results are compared with those of the finite element method (FEM) and correlated with experimental data of fatigue crack-growth tests for two-dimensional structural components under simple loading, aiming to demonstrate the accuracy and efficiency of the methodology adopted, as well as to evaluate the robustness of the BemCracker2D code.
12 August 2019 in International Journal of Structural Integrity
Purpose: The purpose of this paper is to present the application of the boundary element method (BEM) in linear elastic fracture mechanics for analysis of fatigue crack propagation problems in mixed-mode (I+II) using a robust academic software named BemCracker2D and its graphical interface BemLab2D. Design/methodology/approach: The methodology consists in calculating elastic stress by conventional BEM and to carry out an incremental analysis of the crack extension employing the dual BEM (DBEM). For each increment of the analysis, the stress intensity factors (SIFs) are computed by the J-Integral technique, the crack growth direction is evaluated by the maximum circumferential stress criterion and the crack growth rate is computed by a modified Paris equation, which takes into account an equivalent SIF to obtain the fracture Modes I and II. The numerical results are compared with the experimental and/or BEM values extracted from the open literature, aiming to demonstrate the accuracy and efficiency of the adopted methodology, as well as to validate the robustness of the programs. Findings: The paper addresses the numerical simulation of fatigue crack growth. The main contribution of the paper is the introduction of a software for simulating two-dimensional fatigue crack growth problems in mixed-mode (I+II) via the DBEM. The software BemCracker2D coupled to the BemLab2D graphical user interface (GUI), for pre/post-processing, are very complete, efficient and versatile and its does make relevant contributions in the field of fracture mechanics. Originality/value: The main contribution of the manuscript is the development of a GUI for pre/post-processing of 2D fracture mechanics problems, as well as the object oriented programming implementation. Finally, the main merit is of educational nature.
25 September 2021 in Fracture and Structural Integrity
Over the years several design philosophies to fatigue developed in order to combine structural safety and economy to manufacturing and operating aircraft process. The safe-life approach, which consists of designing and manufacturing a safe aeronautical structure throughout its useful life, results in factors that oversize the structural elements, preventing the possibility of failure and evidently leading to high design costs. On the other hand, the approach based on the damage tolerance concept, in which it is assumed that the structure, even whether damaged, is able to withstand the actions for which it was designed until the detection of a crack due to fatigue or other defects during its operation. Here, we propose a new methodology to the damage tolerance problem in which two-dimensional global-local analysis at different levels of external requests will be made by means of compliance, aimed at finding a relationship between fatigue life and the Paris constant. Moreover, the BemCracker2D program for simulating two-dimensional crack growth is used. This methodology has been proved to be an efficient and applied alternative in the damage tolerance analysis.
2 September 2019 in Multidiscipline Modeling in Materials and Structures
ANAlvaro Martins Delgado Neto
Alvaro Martins Delgado Neto
Purpose: The purpose of this paper is to describe further developments on a novel formulation of the boundary element method (BEM) for inelastic problems using the dual reciprocity method (DRM) but using object-oriented programming (OOP). As the BEM formulation generates a domain integral due to the inelastic stresses, the DRM is employed in a modified form using polyharmonic spline approximating functions with polynomial augmentation. These approximating functions produced accurate results in BEM applications for a range of problems tested, and have been shown to converge linearly as the order of the function increases. Design/methodology/approach: A programming class named DRMOOP, written in C++ language and based on OOP, was developed in this research. With such programming, general matrix equations can be easily established and applied to different inelastic problems. A vector that accounts for the influence of the inelastic strains on the displacements and boundary forces is obtained. Findings: The C++ DRMOOP class has been implemented and tested with the BEM formulation applied to classical elastoplastic problem and the results are reported at the end of the paper. Originality/value: An object-oriented technology and the C++ DRMOOP class applied to elastoplastic problems.
30 January 2025 in Mechanics of Advanced Materials and Structures
4 May 2019 in International Journal for Computational Methods in Engineering Science and Mechanics
In this paper, it is proposed an efficient GUI for the treatment of two-dimensional physical geometric models and the generation of mixed meshes of boundary and finite elements, respectively, BEM and FEM. The methodology adopted is to use the BEMLBA2D GUI, a special purpose educational program, aiming to illustrate the functionality and main characteristics of the hybrid modeling. The idea is to generate the FEM mesh, using Delaunay triangles, from the BEM mesh. The verification of the methodology is attested by specific examples of complex geometry with holes, inclusions, and cracks, aiming to validate the use of mixed meshes.