Tougher solar cell interfaces: The low formation energies of the active layers in perovskite solar cells lead to low-toughness materials that are compliant and soft, which limits their interface stability and long-term reliability. Dai et al. show that treatment with iodine-terminated self-assembled monolayers that react with surface hydroxyl groups (which ultimately creates unwanted charge traps and voids) leads to a 50% increase of adhesion toughness between the electron transport layer and a mixed-composition perovskite thin film. The projected point at which 80% of the operating efficiency in perovskite solar cells was still retained increased from ∼700 to 4000 hours for 1-sun exposure with continuous maximum power point tracking. Science , this issue p. 618
Understanding thermal transport at the microscale to the nanoscale is crucially important for a wide range of technologies ranging from device thermal management and protection systems to thermal-energy regulation and harvesting. In the past decades, non-contact optical methods, such as time-domain and frequency-domain thermoreflectance, have emerged as extremely powerful and versatile thermal metrological techniques for the measurement of material thermal conductivities. Here, we report the measurement of thermal conductivity of thin films of CH3NH3PbI3 (MAPbI3), a prototypical metal-halide perovskite, by developing a time-resolved optical technique called vibrational-pump visible-probe (VPVP) spectroscopy. The VPVP technique relies on the direct thermal excitation of MAPbI3 by femtosecond mid-infrared optical pump pulses that are wavelength-tuned to a vibrational mode of the material, after which the time dependent optical transmittance across the visible range is probed in the ns to the μs time window using a broadband pulsed laser. Using the VPVP method, we determine the thermal conductivities of MAPbI3 thin films deposited on different substrates. The transducer-free VPVP method reported here is expected to permit spectrally resolving and spatiotemporally imaging of the dynamic lattice temperature variations in organic, polymeric, and hybrid organic–inorganic semiconductors.