Najidah Hambali

Najidah Hambali

Auto-generated profile, based on publicly available information

Najidah Hambali

Universiti Teknologi MARA (UiTM)

Research Focus & Metrics

Academic Career Length

19Years (2008-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 November 2014
Verified
Conference Paper
Closed access
NHNajidah Hambali
Najidah Hambali
AMAfandi Masngut
Afandi Masngut
AIAbdul Aziz Ishak
Abdul Aziz Ishak
ZJZuriati Janin
Zuriati Janin
The controllability of the process depends on the values need to be chosen for the proportional, integral and derivative constants. The value of proportional, integral and derivative can be estimated using various tuning method. The purpose of this study is to compare the performance of various proportional, integral and derivative controller tuning methods for flow control system. A Tangent Method and Reformulation Tangent Method were compared in this paper to perform the open-loop test. From the open-loop test, the value of response rate, dead time and time constant were obtained. The controller parameters from open-loop test were used in tuning rule to get the optimum value of proportional, integral and derivative gains. The tuning methods used in this paper were Ziegler-Nichols, Cohen-Coon and Chien-Hrones-Reswick. Performance comparison and analysis of the three proportional, integral and derivative tuning were based on percent overshoot, settling time, rise time and integral absolute error. The fine tuning technique has used to improve the result which the value of proportional and integral gains were tuned. The result showed that Ziegler-Nichols and Chien-Hrones-Reswick tuning methods provided better performance compared to CC tuning method.

1 June 2008
Verified
Conference Paper
Closed access
MAM. A. Ahmad
M. A. Ahmad
ZMZ. Mohamed
Z. Mohamed
NHN. Hambali
N. Hambali
This paper presents dynamic modelling of a two-link flexible manipulator based on closed-form equations of motion. The kinematic model is based on standard frame transformation matrices describing both rigid rotation and modal displacement, under small deflection assumption. The Lagrangian approach is used to derive the dynamic model of the structure. Links are modelled as Euler-Bernoulli beams with proper clamped-mass boundary conditions. A dynamic model of the system, incorporating structural damping, hub inertia and payload, is developed using finite assumed mode methods. Explicit equations of motions are detailed by assuming two modes of vibration for each link. Moreover, effects of payload on the response of the flexible manipulator are discussed. Extensive results that validate the theoretical derivation are presented in the time and frequency domains.

1 October 2009
Verified
Conference Paper
Closed access
MAM.A. Ahmad
M.A. Ahmad
RIR.M.T. Raja Ismail
R.M.T. Raja Ismail
MRM.S. Ramli
M.S. Ramli
NGN.M. Abd Ghani
N.M. Abd Ghani
NHN. Hambali
N. Hambali
This paper presents investigations into the development of feed-forward control schemes for anti-swaying control of a gantry crane system. A nonlinear 3-D gantry crane system is considered and the dynamic model of the system is derived using the Euler-Lagrange formulation. An unshaped bang-bang force input is used to determine the characteristic parameters of the system for design and evaluation of the feed-forward control techniques. Feed-forward control schemes based on input shaping and filtering techniques are to be examined. The proposed techniques are designed based on the properties of the system for anti-sway control. Simulation results of the response of the gantry crane system to the shaped inputs are presented in time and frequency domains. Performances of the shapers are examined in terms of swing angle reduction and time response specifications. Moreover, the robustness of the feed-forward control schemes is discussed. Finally, a comparative assessment of the proposed control techniques is presented and discussed.

1 November 2009
Verified
Conference Paper
Closed access
MAMohd Ashraf Ahmad
Mohd Ashraf Ahmad
RIRaja Mohd Taufika Raja Ismail
Raja Mohd Taufika Raja Ismail
MRMohd Syakirin Ramli
Mohd Syakirin Ramli
ANAhmad Nor Kasruddin Nasir
Ahmad Nor Kasruddin Nasir
NHNajidah Hambali
Najidah Hambali
This paper presents investigations into the development of feed-forward control schemes for anti-swaying control of a double-pendulum-type overhead crane (DPTOC) system. A nonlinear DPTOC system is considered and the dynamic model of the system is derived using the Euler-Lagrange formulation. An unshaped bang-bang force input is used to determine the characteristic parameters of the system for design and evaluation of the feed-forward control techniques. Feed-forward control schemes based on input shaping and filtering techniques are to be examined. The proposed techniques are designed based on the properties of the system for anti-sway control. Simulation results of the response of the DPTOC system to the shaped inputs are presented in time and frequency domains. Performances of the control schemes are examined in terms of sway angle reduction and time response specifications. Finally, a comparative assessment of the proposed control techniques is presented and discussed.

1 November 2014
Verified
Conference Paper
Closed access
NHNajidah Hambali
Najidah Hambali
AAAlaniah Ab. Rahim Ang
Alaniah Ab. Rahim Ang
AIAbdul Aziz Ishak
Abdul Aziz Ishak
ZJZuriati Janin
Zuriati Janin
Temperature controllers are needed in any situation requiring a given temperature be kept stable. This can be in a situation where an object is required to be heated, cooled or both and to remain at the desired temperature, regardless of the changing environment around it. The purpose of this study is to compare the performance of three controller tuning methods for an air oven temperature control system. The controller parameters, response rate and dead time are determined by using Reformulated Tangent Method in open-loop test. Then, the optimum Proportional-Integral-Derivative value are determined by using Ziegler-Nichols, Chien et al. and Takahashi tuning methods. The performance of each tuning rule is analyzed in the closed-loop characteristics such as percent overshoot, setting time, rise time and integral absolute error. The fine tuning technique was implemented to improve the result which the value of Proportional-Integral-Derivative gains were tuned. The result presented that the Ziegler-Nichols tuning method give better performance compared to Chien et al. and Takahashi tuning methods.

1 July 2009
Verified
Conference Paper
Closed access
MAM. A. Ahmad
M. A. Ahmad
RIR. M. T. Raja Ismail
R. M. T. Raja Ismail
MRM. S. Ramli
M. S. Ramli
MZM. A. Zawawi
M. A. Zawawi
NHN. Hambali
N. Hambali
NGN. M. Abd. Ghani
N. M. Abd. Ghani
This paper presents investigations into the development of input shaping with proportional-derivative (PD)-type fuzzy logic control for trajectory tracking and vibration control of a flexible joint manipulator. To study the effectiveness of the controllers, a PD-type fuzzy logic controller is developed for tip angular position control of a flexible joint manipulator. This is then extended to incorporate input shaper control schemes for vibration reduction of the flexible joint system. The positive zero-vibration-derivative-derivative (ZVDD) and new modified specified negative amplitude zero-vibration-derivative-derivative (SNA-ZVDD) input shapers are then designed based on the properties of the system for vibration control. The new SNA-ZVDD is proposed to improve the robustness capability while increasing the speed of the system response. Simulation results of the response of the flexible joint manipulator with the controllers are presented in time and frequency domains. The performances of the PD-type fuzzy logic with input shaping control schemes are examined in terms of input tracking capability, level of vibration reduction, robustness and time response specifications. A comparative assessment of the positive ZVDD and modified SNA-ZVDD shapers to the hybrid system performance is presented and discussed.