1 July 2014 in Journal of Propulsion and Power
For external convective heat transfer, a common assumption based on the conventional wisdom is that aerodynamics determines the heat transfer coefficient without being affected by wall temperature. In this paper, a systematic computational study has been carried out on the effects of the wall thermal boundary condition on the external heat transfer coefficient for a two-dimensional nozzle guide vane section. Heat transfer coefficients are worked out first in a typical uncoupled manner with specified wall temperatures. As an alternative verification of the findings, further computations are also made using the coupled solid–fluid conjugate heat transfer mode of the solver. The present results show a strong dependence of heat transfer coefficient on wall temperature, in a locally varying manner, which cannot be corrected by using the existing correlations based on a global correction. A detailed examination of the boundary layer highlights the impact of upstream cooling history on the local heat transfer co...
19 April 2017 in Journal of Thermal Science and Engineering Applications
The present work is aimed to examine how the heat transfer coefficient (HTC) and main three-dimensional (3D) passage aerodynamic features may be affected by a nonadiabatic wall temperature condition. A systematic computational study has been first carried out for a 3D nozzle guide vane (NGV) passage. The impacts of wall temperature on the secondary flows, trailing edge shock waves, and the passage flow capacity are discussed, underlining the connection and interactions between the wall temperature and the external aerodynamics of the 3D passage. The local discrepancies in HTC in these 3D flow regions can be as high as 30–40% when comparing low and high temperature ratio cases. The effort is then directed to a new three-point nonlinear correction method. The benefit of the three-point method in reducing errors in HTC is clearly demonstrated. A further study illustrates that the new method also offers much enhanced robustness in the wall heat flux scaling, particularly relevant when the wall thermal condition is also shown to influence the laminar–turbulent transition exhibited by two well-established transition models adopted in the present work.
28 August 2018 in Journal of Turbomachinery
5 February 2020 in Journal of Engineering for Gas Turbines and Power
Accurate prediction of unsteady thermal loads is of paramount importance in several engineering disciplines and applications. Performing time-accurate unsteady conjugate heat transfer (CHT) simulations presents considerable challenges due to the markedly different time scales between the solid and fluid domains. Two methods have been recently proposed, aimed at addressing this issue: multiscale modeling (MSM) and equalized time-scales (ET). The former is based on the separation of the disparate short and long temporal scales of the solution and subsequent averaging of the flow/energy equations. In the latter, the equalization of the time scales is achieved through manipulation of the solid's thermal properties. Both methods are very appealing due to the possibility of being easily implemented on an existing solver. It becomes, thus, relevant to assess their performance and/or limitations. This paper work presents a comparative study of the two methods for the prediction of transient thermal load, first using a simplified case of a solid body with uniform temperature, then through the investigation of the prewarming phase of a steam turbine. Both methods are then compared against a reference baseline fully coupled (FC) CHT solution. The results show how the MSM allows greater accuracy and robustness with considerable saving in computational cost with respect to the baseline solution.