31 August 2020 in IEEE Access
A six-degree-of-freedom robotic manipulator inverse kinematics (IK) for position control is proposed for the bilateral teleoperation process that is implemented through a joystick for nuclear power plant dismantling operations. The control strategy of the manipulator includes the use of the joystick to generate the Cartesian space trajectory followed by the IK to yield the joint space trajectory for implementing position control. In this paper, a novel technique for the IK is proposed. It involves the use of the particle swarm optimization (PSO) algorithm with the inverse Jacobian (IJ). The special case of the dual PSO is based on dividing the PSO algorithm into two such that the trajectory position and orientation are separately optimized by the algorithms, resulting in a faster convergence. In contrast, the inverse Jacobian aids in generating a smooth joint trajectory. The integral sliding mode control (ISMC) is proposed for position control because it does not require information on system dynamics. The ISMC improves the system trajectory tracking performance by using a switching gain to compensate for system dynamics and perturbations (disturbance and unmatched uncertainties), ultimately reducing the time delay. The effectiveness of the PSO combined with the IJ and the robustness of the ISMC in the teleoperation process are confirmed by the experimental results.
7 February 2022 in IEEE Access
Robot manipulators have complex dynamics and are affected by significant uncertainties and external disturbances (perturbations). Consequently, determining the exact mathematical model of a robot manipulator is a tedious task. Accordingly, accurate trajectory tracking is a dominant feature in the design of position control for robot manipulators. The main objective of this research is to design a robust and accurate position control for a robot manipulator despite the absence of an exact model. For this purpose, an extended state observer (ESO)-based sliding mode control (SMC) is proposed. The main concept in the ESO is to define and estimate the assumed perturbation, which includes known and unknown system dynamics, uncertainties, and external disturbances. Additionally, the ESO estimates the system states. This estimated perturbation information, which is combined with the SMC input, is utilized as a feedback term to compensate for the effect of the actual perturbation. The perturbation compensation improves the controller performance, resulting in a slight position error, less sensitivity to perturbation, and a small switching gain required for the SMC. The advantage of the proposed algorithm is that it only requires partial state information and position feedback. Thus, identifying the system parameters for the nominal model before designing the controller is unnecessary. The proposed algorithm is implemented and compared with the conventional SMC and the SMC with a sliding perturbation observer (SMCSPO) in a virtual environment based on MATLAB SimMechanics. The comparison results validate the robustness of the proposed technique in the presence of perturbation and show that the technique has a significantly reduced trajectory tracking error than the conventional SMC and SMCSPO.
1 March 2025 in Journal of Bionic Engineering