1 February 2022 in Optics Communications
21 January 2025 in Measurement
24 October 2025 in Photonics Research
Frequency-modulated continuous-wave laser LiDAR is a robust optical technology for long-range three-dimensional distance and velocity measurement. However, inherent sweep chirp nonlinearity severely constrains distance resolution and precision. Conventional compensation methods fail to address residual nonlinearity, particularly in rapid, long-range measurement, posing a critical bottleneck to practical applications. Herein, we present a high-order nonlinear solving model and fundamentally compensate for residual nonlinearity, which can improve precision by one to two orders of magnitude over traditional methods. It yields 19.58 μm precision over 25 m for a non-cooperative target without resolution loss, even under experimental conditions where the absolute distance is overwhelmed by noise using traditional methods. This method exhibits robustness across various laser types and achieves precision near the quantum noise limit. This study lays the groundwork for more precise frequency-sweeping coherent detection technologies.
21 November 2024 in Optics Express
This study aims to enhance the measurement accuracy of a dual-sweep frequency modulated continuous wave (FMCW) system used for Doppler compensation for non-cooperative targets in vibration environments. A distance spectrum reconstruction algorithm was developed to improve the ranging accuracy of the dual-sweep FMCW system, and its feasibility was validated through simulation and experimental data. Experiments yielded a standard deviation of 12.12 µm for a measured distance of about 10 m. The proposed method effectively mitigates the colored noise introduced by multiplication without increasing hardware complexity, thereby enhancing measurement accuracy. Thus, the proposed method can provide excellent outcomes in long-distance measurements of non-cooperative targets using FMCW ranging systems.
27 February 2023 in Applied Optics
Frequency-modulated continuous wave (FMCW) laser interferometry is an ideal large-scale absolute distance measurement method. It has advantages of high precision and noncooperative target measurement capability, with no blind spot for ranging. To meet the requirements of high-precision, high-speed 3D topography measurement technologies, a faster measurement speed of FMCW LiDAR at each measurement point is required. To solve the shortcomings of the existing technology, a real-time high-precision hardware solution method (including but not limited to FPGA and GPU) for lidar beat frequency signals is provided here based on hardware multiplier arrays to reduce lidar beat frequency signal processing time and to save energy and resource consumption during processing. A high-speed FPGA architecture was also designed for the frequency-modulated continuous wave lidar range extraction algorithm. The whole algorithm was designed and implemented in real time based on the principle of full-pipelines and parallelism. The results show that the processing speed of the FPGA system is faster than that of current top-performing software implementations.