7 July 2022 in Materials and Corrosion
A global transition towards more sustainable, affordable and reliable energy systems is being stimulated by the Paris Agreement and the United Nation's 2030 Agenda for Sustainable Development. This poses a challenge for the corrosion industry, as building climate‐resilient energy systems and infrastructures brings with it a long‐term direction, so as a result the long‐term behaviour of structural materials (mainly metals and alloys) becomes a major prospect. With this in mind “Corrosion Challenges Towards a Sustainable Society” presents a series of cases showing the importance of corrosion protection of metals and alloys in the development of energy production to further understand the science of corrosion, and bring the need for research and the consequences of corrosion into public and political focus. This includes emphasis on the limitation of greenhouse gas emissions, on the lifetime of infrastructures, implants, cultural heritage artefacts, and a variety of other topics.
1 February 2009 in Energy Procedia
Among the technologies that are under study for CO2 capture from flue gas, the separation process using monoethanolamine (MEA) could be the first to be available for immediate industrial applications in the next few years. The principles of CO2 separation using alkanolamines were discovered nearly a century ago. The process has been applied successfully for several decades in areas such as natural gas processing or coal gasification. The application to flue gas treatment was introduced in the early 1980s, but was not widespread.In such industrial processes, corrosion represents one of the major operational problems. For the capture of CO2 from flue gas using MEA, the problem is even more critical since (i) MEA is one of the most corrosive amine when compared to secondary or tertiary amines that are also used for gas sweetening, and (ii) flue gas contains a certain amount of oxygen, which can react with the amine to form corrosive degradation products.In the framework of the CAPRICE project, which is an International cooperation and exchange project supported by the EU, The International Test centre for CO2 Capture from the University of Regina (CA) and IFP (F) have shared their experience on corrosion monitoring from CO2 capture pilot plants. The first pilot plant facility is owned by ITC. It has a capacity to capture 1 ton CO2/day from a natural gas burner. It is equipped with corrosion control instruments and other monitoring systems. The second pilot plant is located in a coal fired power station in Esbjerg (DK). It was built with the financial support of the UE through the CASTOR project under the lead of IFP. It has been in operation since early 2006, and has a capacity of 1.0 ton CO2/hour. It is equipped with weight loss coupons for corrosion evaluation at different locations in the process.This paper presents the major results of corrosion testing from both pilot plants under MEA operation. It appeared from both pilot plants that the areas most susceptible to corrosion were the stripper inlet and outlet, with corrosion rates around 1 mm.year−1 for carbon steel
1 January 2011 in Energy Procedia
PBPierre-Antoine Bouillon
MNMarie le Febvre de Nailly
Marie le Febvre de Nailly
+4
To make the deployment of carbon capture possible, it is highly needed to develop original solutions that induce low energy penalty and that are easy to operate. This paper aims at presenting the DMX™ process developed at IFP Energies nouvelles based on special solvents which are characterized by the formation of two immiscible phases for given temperature and CO2 loading conditions. The concept of demixtion is briefly described in terms of physico-chemical properties, its interest and all required steps for appropriate process development are discussed. The corresponding process is presented and a technico-economic analysis is given. It is shown than one can reach a reboiler duty as low as 2.1 GJ/t CO2 which is significantly lower than the 3.7 GJ/t CO2 of the 30wt.% MEA reference process. It is also discussed that the energy consumption at reboiler cannot be the only parameter to consider for comparison with other processes and some further information about the DMX™ process are given. Operational issues are particularly discussed. In that sense, the performances of the DMX-1TM solvent in terms of degradation and corrosion are shown. Similarly a particular focus is made on the liquid/liquid separation which is a key aspect of the DMX™ process
1 May 2008 in Corrosion Science
1 October 2008 in Progress in Organic Coatings
1 April 2010 in Corrosion Science