The present study focuses on oil extraction and biodiesel production from naturally grown green Spirogyra algae. Solvent oil extraction and oil expeller techniques were used to extract the Spirogyra algae oil (SALO), and the oil yields were compared to identify the most productive method. Using chicken eggshell waste (CESW) heterogeneous catalyst (HC) was prepared for the production of Spirogyra algae oil biodiesel (SALOBD). Furthermore, Box–Behnken (BB) assisted response surface method (RSM), an optimisation technique, was used in this study to achieve maximum algae biodiesel yield. From the 29 experimental trails, 96.18 % SALOBD was achieved at molar ratio (10:1), heterogeneous catalyst (0.6 wt.%), temperature (48 oC), and time (180 minutes). The predicted values of R2 (97.51%) and Adj. R2 (95.02 %) is found to be encouraging and fits well with the experimental values. The output results show that HC was identified as the significant process constraint followed by the time. The fatty acid composition (FAC) analysis by Gas Chromatography (GCMS) reveals the presence of 29.3 % unsaturated composition and 68.39 wt. % of the saturated composition. Finally, the important fuel properties of SALOBD were identified in accordance with ASTM D6751. The results obtained using chicken eggshell waste (CESW) for the production of biodiesel were recommended as a diesel fuel replacement to resist energy and environmental calamities.
Double-pipe heat exchangers are typically employed in a variety of applications, including refineries and waste heat recovery systems. They are generally used for light-duty applications. They have limitations for heavy-duty applications. Heat transfer must be intensified to overcome this problem. Twisted tapes with diamond cuts of different sizes are inserted into the heat exchanger tubes to improve heat transfer. This creates added areas that disrupt the flow and help increase turbulence, thus promoting better mixing of the fluid. The diamond-cut twisted inserts have a constant twist ratio of 3 and varying scale ratios of 25, 50, and 75. The outcomes suggest that the Nusselt number has increased by 81.43% and the friction factor has increased by a factor of 1.01 compared with a plain tube. The maximum thermal performance factor is found to be 1.3 for a scale ratio of 50. The diamond-cut twisted tapes produced strong swirls, periodic boundary layer disruption, and controlled flow separation and reattachment. These changes increased turbulence, thereby intensifying heat transfer. Generalized correlations were developed for the Nusselt numbers and friction factors.