1 July 2011 in Survey Review
We have developed the most precise vertical displacement rate field of Taiwan Island to date from four sets of precise geodetic levelling data between 2000 and 2008. More than 4000 km of levelling lines between solidly constructed benchmarks were repeatedly surveyed by 1st-order levelling. Strict specifications for field work procedures and comprehensive corrections for systemic errors were applied to the levelling data. Furthermore, in order to account for the vertical deformations caused by four major earthquakes during the data span, coseismic offset corrections were computed and applied. The adjusted orthometric heights and vertical displacement rates of the benchmarks were obtained by least-squares estimation (LSE). The estimated standard deviations of the vertical rates are in the range of ± 0.41 mm/yr and ± 2.47 mm/yr, with a mean value of ± 1.64 mm/yr. These highly accurate results reveal that the most significant subsidence rate is observed in SW Taiwan at -109.4 mm/yr. Land uplift is widely observed in the Central Range and the Coastal Range, with the largest uplift rate of +29.4 mm/yr in SE Taiwan, at the convergence boundary of the Philippine Sea and the Eurasian plates.
20 June 2019 in Journal of Geodesy
30 December 2015 in Earth, Planets and Space
To accommodate the effects of crustal deformation in the current national static geodetic datum (Taiwan Geodetic Datum 1997 (TWD97)) in SW Taiwan, 221 campaign-mode global positioning system (GPS) stations from 2002 to 2010 were used in this study to generate a surface horizontal velocity model for establishing a semi-dynamic datum in SW Taiwan. An interpolation method, Kriging, and a tectonic block model, DEFNODE, were used to construct the surface horizontal velocity model. Forty-four continuous GPS stations were used to examine the performance of the semi-dynamic datum through exterior validation. The average values of the residual errors obtained using the Kriging method for the north and east components are ±1.9 and ±2.2 mm/year, respectively, whereas those obtained using the block model are ±2.0 and ±2.9 mm/year, respectively. The distribution of residuals greater than 5 mm/year for both models generally corresponds to a high strain rate area derived using the horizontal velocity field. In addition, these residuals may result from deep-seated landslide and active folding or mud diapir in a mudstone area. Similar exterior checking results obtained using the Kriging interpolation method and block model for SW Taiwan indicate a high station density and a relatively satisfactory station spatial coverage. However, the block model is superior to the Kriging method due to the consideration of characteristics of the geological structure in the block model. In addition, result from traditional coordinate transformation was used to compare with the semi-dynamic datum. The results indicate that a semi-dynamic datum is a feasible solution for maintaining the accuracy of TWD97 at an appropriate level over time in Taiwan.