Diagnostics of the digestive system carried out properly is becoming more and more important where patients' health status and lives are concerned. Current diagnostic methods include but are not limited to the following: radiodiagnostics, endoscopy, enteroscopy and capsule endoscopy. This article contains a brief presentation of these methods and it describes their main advantages and disadvantages. One of the main conclusions summarizing the description of diagnostic methods is to indicate any “blank spots” in the diagnosis and treatment of the digestive system. This article also presents studies of new devices that will eventually fill in the blank spots in the diagnosis of the digestive system. In the conclusions this article characterizes the most important parameter requirements that a device should possess to meet the expectations of physicians and allow for comprehensive diagnostic assessment of the intestines and taking of samples for further tests.
The article will focus on the presentation of the possibility of practical application of integrated 9-axis sensor, in which magnetic field, acceleration and angular velocity 3-axis sensors were used. Particular emphasis will be placed to describe the mentioned sensors data fusion algorithm, which is necessary for precise and unequivocal determination of the angular position of the tested device. Another presented issue is a selection of an appropriate data filtering algorithm with selected filtering parameters. Additionally, the possibility of implementing described solutions in the angular positions measurement system of cardiosurgical Robin Heart robot master will be shown. Also, a design concept of mentioned robot master along with its working principle will be mentioned.
31 August 2023 in Archive of Mechanical Engineering
In this paper, the authors present a novel construction of an automatic balancing device applicable to balancing shafts working in a heavily polluted environment. The novelty of the presented system lies in the fact that its utilization requires no changes to be made in the already existing shafts. Also, the system is capable of working during the operation of the balanced shaft, so there is no need to stop it. The propulsion system is based on eddy current braking, therefore no wires need to be used in the device. During the development process of the system, three iterations of the device were created. Each iteration is presented, described, and discussed. The advantages and drawbacks of each version are pointed out and explained thoroughly. The correctness of the design was verified by the created devices that were assembled and fixed on shafts to prove the design assumptions.
This paper presents a mathematical method of determination of optimal shape of cooperating rolling elements of spherical shape, i.e. the ones used for drive transmission in ballbots. The presented method takes all geometric parameters of such devices into account and can be easily adjusted to a wider selection of devices.