29 June 2023 in SUMO Conference Proceedings
Microscopic traffic simulation tools provide ever-increasing value in the design and implementation of motor vehicle transport systems. Research and development of automated and intelligent technologies have highlighted the usefulness of simulation tools and development efforts have accelerated in recent years. However, the majority of traffic simulation software is developed with a focus on motor vehicle traffic and has limited capabilities in the simulation of bicycles and other micro-mobility modes. Bicycles, e-bikes and cargo bikes represent a non-negligible modal share in many urban areas and their impact on the operation, efficiency and safety of traffic systems must be considered in any comprehensive study. The Differentiation between different types of micro-mobility modes, including microcars, e-kick scooters, different types of bicycles and other personal mobility devices, has not yet attracted enough attention in the development of simulation software which creates difficulties in including these modes in simulation-based studies. On November 25th, 2022, members of the SUMO team at DLR organized a workshop to assess the state of bicycle simulation in SUMO, identify shortcomings and missing capabilities and prioritize the order in which bicycle traffic related features should be modified or implemented in the future. In this paper, different aspects of simulating bicycle traffic in SUMO are examined and an overview of the results of the workshop discussions is given. Some suggestions for the future development of SUMO emerging from this workshop, are presented as a conclusion.
1 January 2014 in Transportation Research Procedia
One of the most relevant pieces of information for cooperative driver assistance systems based on car to infrastructure communication is the upcoming signal state at signalized intersections. For example, functions like Green Light Optimized Speed Advisory need a short term forecast of the switching times. Unfortunately, in case of vehicle actuated control these switching times cannot be easily determined and need to be estimated using probability theory. In this paper different driver assistance functions and their respective requirements on the precision of the prediction are discussed. In order to assess the reliability of existing prediction methods, a well-known algorithm based on Markov chains is evaluated using a microscopic simulation study. The internal Markov states are represented by combinations of signal states and corresponding detector counts. In the model which is used for simulation two existing urban intersections are considered: Whereas one of the intersections is characterized by public transport priority, the signal times at the other intersection are adapted with respect to private cars only. Based on the results of the simulation study the performance and the deficiencies of the known Markov-chain based prediction method are analyzed in order to derive starting points for the development of an extended approach which takes additional constraints into consideration. Both, the known and the extended prediction method are then evaluated with respect to the specific requirements of the driver assistance functions. Based on the evaluation conclusions are drawn and recommendations for the application of the methods are given
24 January 2019 in Transportation Research Procedia
In an urban environment, drivers have to yield to many other road users. This is still a difficult challenge for autonomous vehicles and could be facilitated by reducing the number of permissive turnings at signalised intersections. If autonomous vehicles were segregated at a presignal, they could be given exclusive protected movements. Other traffic streams could still be signalled permis-sively. An analytical model has been developed here based on the constraints of this intersection operation mode in order to estimate its capacity given a specific set of circumstances (the configuration of the traffic signal program and layout of the infrastructure). The model is used to maximise capacity depending on the position of the presignal.
1 January 2017 in Transportation Research Procedia
Many researchers and traffic engineers have been working on optimizing signal control with respect to its effects on traffic flow and externalities like emissions. As large field studies for traffic management are not sustainable and actuated control strategy becomes complex, its evaluation is done with microscopic traffic simulation. However, their integrated signal control model often impedes implementing the custom control strategy in contrast to signal planning software. Making both types of software cooperate offers valuable perspectives to develop and evaluate a custom control strategy more efficiently. In this work, an overview of signal control and how it can be modeled in microscopic traffic simulation is given. Then, the signal planning software LISA+ and a microscopic traffic simulation (Aimsun in this case) are connected to allow for external signal control. LISA+ offers a virtual signal controller to communicate with external applications via network. Aimsun sends information about the chosen signal program and the detected vehicles to the controller and receives back the signal states for the next simulation second. This concept is presented in detail taking into account the communication protocol and the implementation on the Aimsun side. A case study with time-dependent actuated signal control is included as well.
15 July 2025 in SUMO Conference Proceedings
The growing number of battery electric vehicles (BEV) implies changes in urban infrastructure. Large amounts of charging stations are to be built within few years to supply energy for a mostly electric vehicle fleet. In parallel the power grid has to be adpated to the growing energy demand. However charging behaviour depends on mobility patterns and which type of charging stations can be accessed. For example, charging at work is mostly restricted to employees and happens during working hours. Public charging stations cater any BEV user but take precious public space. In this work several charging station configurations for a city are studied on a microscopic level together with different BEV shares and charging strategies and policies. 24 hour working day SUMO microsopic traffic demand travels along trip chains and charges their electric vehicle battery when needed. Parking and charging infrastructure is limited to reasonable capacity for a medium sized German city. Then the configurations are evaluated with respect to charging station usage and the expected energy demand/supply of BEV for balanced and time-shift charging strategies as well as vehicle-to-home/vehicle-to-grid policies. Applying these strategies and policies on a large scale can lower the energy peak demand visibly.