1 August 2016 in Energy and Buildings
RGR.A. da Costa Gonçalves
1 February 2016 in Géotechnique
In this technical note, the results of a set of simplified numerical analyses are presented. The analyses were undertaken in order to examine the validity of a descriptive framework that was previously proposed to illustrate the behaviour of thermally activated piles and to highlight the potential limitations of some analytical methods that are being applied to their study and design. Working on the premise that some soils, specifically moderately to highly over-consolidated clays, may experience thermally induced volume changes larger than concrete elements inserted into the ground, the results of the study highlight that analyses that do not account for the initial temperature field and boundary conditions, and the response of the ground to temperature changes, may yield erroneous conclusions with respect to the performance of operational thermally activated piles used to support temperature-controlled structures.
1 April 2004 in Géotechnique
A series of ring shear tests was conducted to investigate the development of particle breakage with shear strain for a carbonate sand. It was found that at very large displacements the soil reached a stable grading, but that the final grading was dependent on both the applied normal stress and the initial grading. The particle breakage caused a volumetric compression, which again ceased only when the stable grading had been attained, emphasising that critical states as observed at much smaller strains in triaxial tests are not rigorously defined. Despite the severe degradation of the soil particles the mobilised angle of shearing resistance was found not to change significantly. Nous avons mené une série d’essais de cisaillement annulaire afin d’enquêter sur le développement des cassures de particules avec une déformation de cisaillement pour un sable carbonate. Nous avons trouvé qu’avec de très importants déplacements, le sol parvenait à une granulométrie stable mais que la granulométrie finale dépendait de la contrainte normale appliquée et de la granulométrie initiale. La cassure des particules provoque une compression volumétrique qui, encore une fois, ne cesse que lorsque la stabilité granulométrique est atteinte, soulignant le fait que les états critiques tels que ceux qui sont observés avec des déformations bien plus petites dans les essais triaxiaux ne sont pas rigoureusement définis. Nous avons trouvé que malgré la dégradation sévère des particules de sol, l’angle mobilisé de résistance au cisaillement ne changeait pas de manière significative.
1 September 2011 in Computers and Geotechnics
1 December 2022 in Geomechanics for Energy and the Environment