>50 % of the organic matter in sewage consist of particulate chemical oxygen demand (pCOD). This study used 250 μm fluorescent microbeads, 130±58 μm microparticles and 100 nm nanobeads to simulate sewage particles, and investigated the fate of these particles under both plug flow feeding and aeration phases in an aerobic granular sludge (AGS) system. Filtration performance was dominantly influenced by the particle size rather than the upflow velocity (Vupflow). The microbeads exhibited 95±3 % filtration efficiency with obvious accumulation around the AGS bed bottom, even as slight fluidization started at the Vupflow of 5.0 m·h-1. In contrast, the nanobeads filtration efficiency was significantly lower (43±6 %). During the aeration phase, the attachment efficiency increased with the decrease of particle size. The microbeads attachment efficiency variated between 39-49 %, whereas the microparticles and nanobeads achieved better attachment of 89.4-95.2 % and 98.8-99.3 %, respectively. Furthermore, aeration batch tests showed both nanobeads and the irregular microparticles attachment by AGS was strong, and the detach-attach of nanobeads/microparticles between different sized AGS was very limited duration aeration. This work provides insight into the fate of particles in AGS system. The optimal sludge treatment was also evaluated in the scope of this removal of non-biodegradable, and potentially harmful particles.
7 December 2025 in Journal of Environmental Management
Aerobic granular sludge (AGS) is a microbial aggregate utilized in wastewater treatment, often coexisting with flocculent sludge. This study applied a step-feeding strategy in a sequencing batch airlift reactor (SBAR) to treat synthetic sewage. The sludge morphology and nitrogen removal performance were assessed under different feeding steps. The results indicated that both hydraulic shear force and feeding steps significantly contributed to the formation of dense AGS. Under three feeding steps, the average biomass particle size increased from 223 to after 25 days, with mixed liquid suspended solids (MLSS) of and sludge volume index (SVI) of . When the influent concentration was , the effluent total nitrogen (TN), , and decreased to 6.84, 6.80, and , respectively. High-throughput sequencing revealed a substantial enrichment of extracellular polymeric substance (EPS) producing and denitrifying bacteria after 60 days. Variations in nitrogen conversion pathways further demonstrated that three steps of step-feeding effectively enhanced the denitrification capacity of AGS. This study highlights that step-feeding can optimize nitrogen removal while simultaneously enhancing granulation, providing a theoretical basis for advanced nitrogen removal in AGS systems.