Acetogenic bacteria are attracting interest as biocatalysts in the biotechnology industry, since they are able to ferment carbon monoxide (CO)-rich gases. Wild-type strains produce mainly acetate and ethanol, but genetic modifications have already broadened the product portfolio. To enhance the production of intrinsic or heterologous biochemicals, knowledge of the microbial physiology is necessary. This physiology includes two different phases: acidogenesis (growth/acetate production) and solventogenesis (starvation/ethanol production). We operated two sequential, continuous bioreactors with a pure culture of Clostridium ljungdahlii to achieve steady-state conditions in an acetate- and an ethanol-producing stage to spatially separate acidogenesis and solventogenesis. Here, nearly 2000 proteins and their differential abundance between acidogenesis and solventogenesis were identified. In addition, we measured important metabolites. The results showed that nutrient-limited conditions triggered a transition to solventogenesis without altering the differential abundance of enzymes in the central energy metabolism. Our proteomics results revealed that the enzymes for ethanol production (AOR/ADH) were consistently abundant, even during acidogenesis. Based on this work, we developed an overflow model with thermodynamic rather than genetic regulation. The model identifies acetic acid and reduced cofactors as saturation reactants. When the intracellular concentration of undissociated acetic acid reaches a thermodynamic threshold, C. ljungdahlii will be able to shunt surplus reducing equivalents toward ethanol immediately. This is important during retarded growth, when reducing equivalents can no longer be shunted toward biomass production, while the supply of CO-rich gas is still high. Nutrient availability and pH can be manipulated to achieve the desirable level of solventogenesis during bioprocessing.
Carboxydotrophic bacteria (CTB) have received attention due to their ability to synthesize commodity chemicals from producer gas and synthesis gas (syngas). CTB have an important advantage of a high product selectivity compared to chemical catalysts. However, the product spectrum of wild-type CTB is narrow. Our objective was to investigate whether a strategy of combining two wild-type bacterial strains into a single, continuously fed bioprocessing step would be promising to broaden the product spectrum. Here, we have operated a syngas-fermentation process with Clostridium ljungdahlii and Clostridium kluyveri with in-line product extraction through gas stripping and product condensing within the syngas recirculation line. The main products from C. ljungdahlii fermentation at a pH of 6.0 were ethanol and acetate at net volumetric production rates of 65.5 and 431 mmol C•L-1•d-1, respectively. An estimated 2/3 of total ethanol produced was utilized by C. kluyveri to chain elongate with the reverse β-oxidation pathway, resulting in n-butyrate and n-caproate at net rates of 129 and 70 mmol C•L-1•d-1, respectively. C. ljungdahlii likely reduced the produced carboxylates to their corresponding alcohols with the reductive power from syngas. This resulted in the longer-chain alcohols n-butanol, n-hexanol, and n-octanol at net volumetric production rates of 39.2, 31.7, and 0.045 mmol C•L-1•d-1, respectively. The continuous production of the longer-chain alcohols occurred only within a narrow pH spectrum of 5.7-6.4 due to the pH discrepancy between the two strains. Regardless whether other wild-type strains could overcome this pH discrepancy, the specificity (mol carbon in product per mol carbon in all other liquid products) for each longer-chain alcohol may never be high in a single bioprocessing step. This, because two bioprocesses compete for intermediates (i.e., carboxylates): 1) chain elongation; and 2) biological reduction. This innate competition resulted in a mixture of n-butanol and n-hexanol with traces of n-octanol.
The product of current syngas fermentation systems is an ethanol/acetic acid mixture and the goal is to maximize ethanol recovery. However, ethanol currently has a relatively low market value and its separation from the fermentation broth is energy intensive. We can circumvent these disadvantages of ethanol production by converting the dilute ethanol/acetic acid mixture into products with longer carbon backbones, which are of higher value and are more easily extracted than ethanol. Chain elongation, which is the bioprocess in which ethanol is used to elongate short-chain carboxylic acids to medium-chain carboxylic acids (MCCAs), has been studied with pure cultures and open cultures of microbial consortia (microbiomes) with several different substrates. While upgrading syngas fermentation effluent has been studied with open cultures, to our knowledge, no study exists that has performed this with pure cultures. Here, pure cultures of Clostridium kluyveri were used in continuous bioreactors to convert ethanol/acetic acid mixtures into MCCAs. Besides changing the operating conditions in regards to substrate loading rates and composition, the effect of in-line product extraction, pH, and the use of real syngas fermentation effluent on production rates were tested. Increasing the organic loading rates resulted in proportionally higher production rates of n-caproic acid, which were up to 40 mM day−1 (4.64 g L−1 day−1) at carbon conversion efficiencies of 90% or higher. The production rates were similar for bioreactors with and without in-line product extraction. Furthermore, a lower ethanol/acetic acid ratio (3:1 instead of 10:1) enabled faster and more efficient n-caproic acid production. In addition, n-caprylic acid production was observed for the first time with C. kluyveri (up to 2.19 ± 0.34 mM in batch). Finally, the use of real effluent from syngas fermentation, without added yeast extract, but with added defined growth factors, did maintain similar production rates. Throughout the operating period, we observed that the metabolism of C. kluyveri was inhibited at a mildly acidic pH value of 5.5 compared to a pH value of 7.0, while reactor microbiomes perform successfully at mildly acidic conditions. Clostridium kluyveri can be used as a biocatalyst to upgrade syngas fermentation effluent into MCCAs at pH values above 5.5.
To prevent an environmental collapse while feeding a population of 10 billion people, dilute nitrogen in waste streams as a nitrogen source and carbon dioxide as a carbon source should be converted into edible protein as part of the circular economy.