9 October 2024 in IEEE Transactions on Instrumentation and Measurement
It is vital to accurately estimate the state of health (SOH) of lithium-ion batteries of electrical vehicles. Despite the significant impact of temperature on the SOH, most conventional data-driven methods for SOH estimation neglect the influence of temperature-related characteristics. This paper proposes a novel SOH estimation method with attentional feature fusion (AFF) considering differential temperature (DT) features for lithium-ion batteries. Firstly, this paper extracts DT features from the differential temperature curves and employs the Pearson correlation coefficient (PCC) to select the health features (HFs) of the DT curve that exhibit the strongest correlation with SOH. Then, a novel SOH estimation model combining AFF and LSTM (AFF-LSTM) is proposed, which can automatically learn the influence weights of different types of HFs on SOH, thereby improving the accuracy of SOH estimation. The MAPE evaluation metric is approximately 0.126% on the Oxford dataset. Finally, various comparative analyses demonstrate that the proposed method can accurately estimate the SOH of lithium-ion under different operating temperatures.
9 December 2024 in IEEE Transactions on Power Electronics
To guarantee the safe and efficient operation of lithium-ion batteries, it is crucial to precisely estimate the state of health (SOH) of batteries. However, most of the existing studies have primarily focused on complete or large-range charging curves, which are highly challenging to acquire in practical applications. To this end, a novel SOH estimation method based on partial charging curve reconstruction is proposed in this article. First, a partial charging curve reconstruction model based on a convolutional neural network reconstructs the charging segments from voltage ranges with low SOH correlation to those with high SOH correlation. Second, health features are extracted from the reconstructed charging segments and used as inputs to estimate the SOH based on a Gaussian process regression model. Finally, validation experiments were conducted on two lithium-ion battery datasets to demonstrate the effectiveness and generalization of the proposed method. The proposed method enables precise SOH estimation using only a narrow charging segment (0.05 V), making it suitable for practical application scenarios.
3 January 2025 in IEEE Transactions on Transportation Electrification
It is essential to accurately estimate the state of health (SOH) for lithium-ion batteries from the perspectives of safety and reliability. However, most existing data-driven methods are based on charging or discharging data, which is relatively difficult to apply. This paper proposes a novel SOH estimation approach based on the relaxation voltage reconstruction and a long short-term memory network with an attention mechanism (AM-LSTM) method. First, based on the relaxation voltage data, a complete relaxation curve is reconstructed with a gated recurrent unit (GRU) neural network. Next, health feature (HF) extraction is carried out on the reconstructed data, and the correlation is analyzed based on Pearson correlation analysis. Then, the SOH estimation is performed based on the AM-LSTM model. Various comparative studies have been conducted to verify the effectiveness of the proposed method by comparing it with relaxation voltage reconstruction and different SOH estimation methods. The experimental results demonstrate that the proposed method can effectively reconstruct the relaxation voltage and have good accuracy in estimating the SOH with a partial relaxation voltage curve.
8 October 2024 in IEEE Sensors Journal
It is critical to accurately estimate the state of health (SOH) to ensure the safe and efficient operation of lithium-ion batteries. To reduce the training amounts of existing data-driven methods, transfer learning method has attracted more attention. However, most previous studies lack validation with different battery types and working conditions. Furthermore, the shared knowledge just relies on raw current and voltage data, resulting in insufficient accuracy. This paper proposes a stacked-LSTM transfer learning (TL) method based on Bayesian optimization (BO-Stacked-LSTM), which integrates multiple features to estimate SOH. By improving the structure of the BO-Stacked-LSTM networks and the fine-tuning strategy of transfer learning, as well as employing a Bayesian optimization algorithm to optimize hyperparameters, the proposed method can achieve accurate SOH estimation. Experimental results demonstrate that it just requires a small quantity of target dataset to accurately estimate SOH on the target dataset. Furthermore, experiments were performed on three different lithium-ion battery datasets, to validate the effectiveness.
12 September 2021 in European Journal of Lipid Science and Technology
8 November 2023 in IEEE Journal of Emerging and Selected Topics in Power Electronics
This paper investigates a double-stator dual permanent magnet (dual-PM) hybrid excitation machine (DS-DHEM) with dc bias current. Integrated winding accommodated on the outer stator can produce the armature field and excitation field simultaneously with the dc bias current to improve the efficiency and flux regulation capability, and the dual consequent-pole PMs on the inner stator and rotor are proposed to enhance the torque density. The working principle of the proposed DS-DHEM is based on multiple working harmonics introduced by three excitation sources and flux modulation effect, which is demonstrated by developing magnetic motive force (MMF) and permeance models. The influence of key parameters is studied, after which the multi-objective genetic algorithm (MOGA) is exploited to optimize the global design parameters. In addition, the stator-PM is found to have the largest torque contribution for DS-DHEM with the frozen permeability (FP) method. The comparative studies between DS-DHEM and an existing dual-PM hybrid excitation machine (DP-HEM) are performed to convincingly verify the superiority of DS-DHEM, which exhibits larger torque density, higher efficiency, and better flux regulation capability. Finally, a prototype is manufactured to conduct the experimental tests to validate the proposed machine.