Hydrogenation of CO2 is very attractive for transforming this greenhouse gas into valuable high energy density compounds. In this work, we developed a highly active and stable Ru/TiO2 catalyst for CO2 methanation prepared by a solgel method that revealed much higher activity in methanation of CO2 (ca. 4–14 times higher turnover frequencies at 140–210°C) than state-of-the-art Ru/TiO2 catalysts and a control sample prepared by wetness impregnation. This is attributed to a high concentration of O-vacancies, inherent to the solgel methodology, which play a dual role for 1) activation of CO2 and 2) transfer of electrons to interfacial Ru sites as evident from operando DRIFTS and in situ EPR investigations. These results suggest that charge transfer from O-vacancies to interfacial Ru sites and subsequent electron donation from filled metal d-orbitals to antibonding orbitals of adsorbed CO are decisive factors in boosting the CO2 methanation activity.
15 November 2023 in Angewandte Chemie International Edition
Optimizing processes and materials for the valorization of CO2 to hydrogen carriers or platform chemicals is a key step for mitigating global warming and for the sustainable use of renewables. We report here on the hydrogenation of CO2 in water on ZnO‐supported CuAu nanoalloys, based on ≤7 mol % Au. CuxAuy/ZnO catalysts were characterized using 197Au Mössbauer, in situ X‐ray absorption (Au LIII‐ and Cu K‐edges), and ambient pressure X‐ray photoelectron (APXP) spectroscopic methods together with X‐ray diffraction and high‐resolution electron microscopy. At 200 °C, the conversion of CO2 showed a significant increase by 34 times (from 0.1 to 3.4 %) upon increasing Cu93Au7 loading from 1 to 10 wt %, while maintaining methanol selectivity at 100 %. Limited CO selectivity (4–6 %) was observed upon increasing temperature up to 240 °C but associated with a ≈3‐fold increase in CO2 conversion. Based on APXPS during CO2 hydrogenation in an H2O‐rich mixture, Cu segregates preferentially to the surface in a mainly metallic state, while slightly charged Au submerges deeper into the subsurface region. These results and detailed structural analyses are topics of the present contribution.
Die Optimierung von Prozessen und Materialien für die Valorisierung von CO2 zu Wasserstoffträgern oder Plattformchemikalien ist ein wichtiger Schritt zur Eindämmung der globalen Erwärmung und zur nachhaltigen Verwendung von erneuerbaren Energien. Wir berichten hier über die Hydrierung von CO2 in Wasser an ZnO‐geträgerten CuAu‐Nanolegierungen, basierend auf ≤7 mol % Au. Die CuxAuy/ZnO‐Katalysatoren wurden mit Hilfe von 197Au‐Mössbauer, In situ‐Röntgenabsorption (Au LIII‐ und Cu K‐Kanten) und Umgebungsdruck‐Röntgenphotoelektronen (APXPS) spektroskopische Methoden zusammen mit Röntgenbeugung und hochauflösender Elektronenmikroskopie charakterisiert. Bei 200 °C stieg der CO2‐Umsatz bei einer Erhöhung der Cu93Au7‐Beladung von 1 auf 10 Gew.‐% signifikant um das 34‐fache (von 0.1 auf 3.4 %), wobei die Methanolselektivität bei 100 % blieb. Eine begrenzte CO‐Selektivität (4–6 %) wurde bei einer Temperaturerhöhung bis auf 240 °C beobachtet, die jedoch mit einem ≈3‐fachen Anstieg der CO2‐Umwandlung einherging. Auf der Grundlage von APXPS, während der CO2‐Hydrierung in einem H2O‐reichen Gemisch segregiert Cu bevorzugt an der Oberfläche in einem hauptsächlich metallischen Zustand, während leicht negative‐geladenes Au tiefer in den unterirdischen Bereich eintaucht. Diese Ergebnisse und detaillierte Strukturanalysen sind Gegenstand des vorliegenden Beitrags.
Near-surface molecular-beam mass spectrometry (ns-MBMS) is a highly sensitive and non-destructive method for temporal monitoring of catalytic conversions on solid surfaces yet not widely applied in heterogeneous catalysis. Herein, we apply and validate the use of ns-MBMS to follow the thermo-catalytic reduction of CO2 on oxide supported catalysts. In our study, we focused on two structurally different Ru/TiO2 catalysts known to behave distinctly differently toward CO2 conversion, one promoting CO2 methanation (Ru/TiO2-1), and the other Ru/TiO2 promotes CO formation via reverse-water-gas shift reaction (Ru/TiO2-2). This disparity in product selectivity for CO2 reduction allows us to clearly examine the limits of ns-MBMS not only for differences in CO2 conversion but also for drastic difference product selectivity with reference to well-established catalytic system. The recorded mass spectra showed apparently similar reaction behavior compared to results reported using standard flow reactors, particularly the temperature dependence of CO₂-reduction product selectivity. In contrast to conventional catalytic measurements, ns-MBMS enabled direct observation of the temporal evolution of transient near-surface products, revealing the formation of species such as CO and C₂H₄ that had not been previously detected. These species relate to specific surface intermediates, such as COad, or spectator fragments like -CH₂- formed on Ru/TiO₂. Reactivity results observed using ns-MBMS experiments are supported by insights on the surface adlayer during CO2 reduction obtained from diffuse-reflectance FTIR spectroscopy.