3 May 2012 in Nanotechnology
The introduction of hydrogen chloride during the in situ doping of silicon nanowires (SiNWs) grown using the vapor-liquid-solid (VLS) mechanism was investigated. Compared with non-chlorinated atmospheres, the use of HCl with dopant gases considerably improves the surface morphology of the SiNWs, leading to extremely smooth surfaces and a greatly reduced tapering. Variations in the wire diameter are massively reduced for boron doping, and cannot be measured at 600 °C for phosphorous over several tens of micrometers. This remarkable feature is accompanied by a frozen gold migration from the catalyst, with no noticeable levels of gold clusters observed using scanning electron microscopy. A detailed study of the apparent resistivity of the NWs reveals that the dopant incorporation is effective for both types of doping. A graph linking the apparent resistivity to the dopant to silane dilution ratio is built for both types of doping and discussed in the frame of the previous results.
24 December 2025 in The European Physical Journal C
Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model. The report reviews the experimental opportunities offered by the staged implementation of FCC, beginning with an electron-positron collider (FCC-ee), operating at several centre-of-mass energies, followed by a hadron collider (FCC-hh). Benchmark examples are given of the expected physics performance, in terms of precision and sensitivity to new phenomena, of each collider stage. Detector requirements and conceptual designs for FCC-ee experiments are discussed, as are the specific demands that the physics programme imposes on the accelerator in the domains of the calibration of the collision energy, and the interface region between the accelerator and the detector. The report also highlights advances in detector, software and computing technologies, as well as the theoretical tools/reconstruction techniques that will enable the precision measurements and discovery potential of the FCC experimental programme. The content and structure of this report are guided by the scope and priorities defined in the mandate of the FCC Feasibility Study. It is therefore not intended to serve as an exhaustive review of the full physics potential of FCC. Several topics, already covered in earlier reports such as the FCC CDR, are not reiterated here or are addressed only briefly, in alignment with the study’s focus. This volume reflects the outcome of a global collaborative effort involving hundreds of scientists and institutions, aided by a dedicated community-building coordination, and provides a targeted assessment of the scientific opportunities and experimental foundations of the FCC programme.
21 January 2019 in Superconductor Science and Technology
1 February 2022 in IEEE Transactions on Applied Superconductivity
The axion is a hypothetical particle which is a candidate for cold dark matter. Haloscope experiments directly search for these particles in strong magnetic fields with RF cavities as detectors. The Relic Axion Detector Exploratory Setup (RADES) at CERN in particular is searching for axion dark matter in a mass range above 30 $\mu$ eV. The figure of merit of our detector depends linearly on the quality factor of the cavity and therefore we are researching the possibility of coating our cavities with different superconducting materials to increase the quality factor. Since the experiment operates in strong magnetic fields of 11 T and more, superconductors with high critical magnetic fields are necessary. Suitable materials for this application are for example REBa $_2$ Cu $_3$ O $_{7-x}$ , Nb $_3$ Sn or NbN. We designed a microwave cavity which resonates at around 9 GHz, with a geometry optimized to facilitate superconducting coating and designed to fit in the bore of available high-field accelerator magnets at CERN. Several prototypes of this cavity were coated with different superconducting materials, employing different coating techniques. These prototypes were characterized in strong magnetic fields at 4.2 K.
23 May 2011 in Semiconductor Science and Technology
15 July 2011 in Journal of Applied Physics
Growth of Si, Ge, and, thus, SiGe nanowires (NWs) by catalyzed chemical vapor deposition proceeds at different process conditions, preventing easy realization of axial multijunctions interesting for device realization. In this paper, we propose a common process to obtain both Si, Ge, and alloyed NWs simply by adding HCl in the gas phase. It is demonstrated that addition of HCl during the growth improves the structural quality of the SiGe NWs, avoids the tapering of NWs by decreasing the uncatalyzed growth, increases the Ge fraction of the SiGe alloy NWs, and decreases the growth rate. A qualitative model based on the experimental results is proposed to explain the role of HCl during the growth. This model can be more generally applied to explain the tendency observed in the literature concerning the growth of SiGe alloyed NWs without HCl. It is based on a competition between adsorption, decomposition, and incorporation of Si and Ge in the catalyst. This competition is mainly regulated by the gas phase composition and by the reaction between the reactive species and the catalyst surface.