1 December 2019 in Journal of Petroleum Science and Engineering
JCJoão Andrade de Carvalho
25 October 2016 in SAE International Journal of Advances and Current Practices in Mobility
MMMarcelo Sampaio Martins
LMLucas Reis Rangel Querido Moreira
Lucas Reis Rangel Querido Moreira
MHMarcos Yukio Tokuue Hori
LSLuís Felipe Santos Silva
The torsional stiffness of a chassis is one of the most important properties of a vehicle’s structure, once a low torsional stiffness has many negative effects, especially in handling characteristics. For the first time, the torsional stiffness was considered on the design of a Baja SAE prototype of the team from UNESP - FEG, “Equipe Piratas do Vale”. In this work, a finite element analysis is first performed in order to evaluate the torsional stiffness of this prototype, called MB1114. Then, an experimental evaluation of this parameter is executed, detailing the post-processing of the results, such as the hysteresis effect and uncertainty analysis. It also shows that it is possible to measure the torsional stiffness of chassis with a low experimental uncertainty without spending too much. The test rig used is simple to be produced and can be easily stocked. Those features are important for Baja and Formula SAE teams. After performing the finite element analysis, a result 13.4% higher than the measured value was reached. This difference is believed to be due to the finite element model inaccuracy, in other words, it came from the fact that is not possible to simulate every detail present on the real model.
1 October 2023 in Review of Scientific Instruments
This work presents the development of a cavity ring-down spectrometer (CRDS) designed for the detection of several molecules relevant for air pollution, including the second overtone of ro-vibration transitions from CO at 1.58 µm and NO at 1.79 µm. A unique feature of this CRDS is the use of custom mirrors with a reflectivity of about 99.99% from 1.52 to 1.80 µm, enabling efficient laser coupling into the cavity while ensuring a minimum detectable absorbance of 1.1 × 10−10 cm−1 within an integration time of about 1.2 s. In this work, the successful implementation of the current CRDS is demonstrated in two different wavelength regions. At 1.79 µm, the transitions R17.5 and R4.5 of the second overtone of NO are detected. At 1.58 µm, carbon dioxide and water vapor from untreated ambient air are measured, serving as an example to investigate the suitability of a post-processing procedure for the determination of the molar fraction in a multi-species composition. This post-processing procedure has the benefit of being calibration-free and SI-traceable. Additionally, CRDS measurements of gas mixtures containing CO and CO2 are also shown. In the future, the advantages of the developed cavity ring-down spectrometer will be exploited in order to perform fundamental studies on the transport processes of heterogeneous catalysis by locally resolving the gas phase near a working catalytic surface. The possibility to cover a broad wavelength region with this CRDS opens up the opportunity to investigate different catalytic reactions, including CO oxidation and NO reduction.