1 April 2024 in Physics of Fluids
Eutectic alloys display excellent application performances since the essential function of coupled microstructures is quite different from that of single-phase and peritectic alloys. However, due to the strong natural convection within liquid alloys under normal gravity, the eutectic growth process on earth usually produces traditional rod-like or lamellar composite microstructures, which hinders the exploration of distinctive coupled growth patterns. Here, we carried out the rapid solidification of hypoeutectic Zr64V36 alloy to explore novel coupled growth dynamics aboard the China Space Station under a long-term stable microgravity condition. An extreme liquid undercooling of 253 K was achieved for this refractory alloy, displaying a strong metastability in outer space. We find that a radial coupled pattern grew out of the nucleation site, accompanying a ripple-like surface microstructure. This resulted from the rapid eutectic growth within a highly undercooled alloy in combination with a liquid surface wave excited by the electrostatic field under microgravity. Especially, a spiral coupled growth mode occurred during radial eutectic growth and surface wave spreading, which were controlled by the Marangoni convection effect on the fluid flow pattern and eutectic growth dynamics. Our findings contribute to the coupled growth investigation by modulating gravity levels to develop multi-pattern microstructures.
22 February 2023 in Journal of Applied Physics
The physical properties of liquid alloy are crucial for many science fields. However, acquiring these properties remains challenging. By means of the deep neural network (DNN), here we presented a deep learning interatomic potential for the Ti–Ni–Cr–Al liquid system. Meanwhile, the thermophysical properties of the Ti–Ni–Cr–Al liquid alloy were experimentally measured by electrostatic levitation and electromagnetic levitation technologies. The DNN potential predicted this liquid system accurately in terms of both atomic structures and thermophysical properties, and the results were in agreement with the ab initio molecular dynamics calculation and the experimental values. A further study on local structure carried out by Voronoi polyhedron analysis showed that the cluster exhibited a tendency to transform into high-coordinated cluster with a decrease in the temperature, indicating the enhancement of local structure stability. This eventually contributed to the linear increase in the density and surface tension, and the exponential variation in the viscosity and the diffusion coefficient with the rise of undercooling.
24 July 2023 in Journal of Applied Physics
The thermophysical properties of Si–Ge–Ag alloys in a broad temperature range are essential for the design of electronic devices. In this work, relationships between specific heat, thermal expansion, thermal conductivity and temperature, as well as chemical composition of Si–Ge–Ag alloys were clarified. Moreover, various thermophysical properties’ prediction strategies of multicomponent alloys from pure elements were evaluated. The specific heat of Ag–Si, Ag–Ge, Si–Ge, and Si–Ge–Ag alloys was determined by the differential scanning method. The results showed a significant increase with rising temperature at low temperatures followed by a gradual rise at high temperatures. The specific heat reached the maximum value when a small amount of Si/Ge was introduced to Ag. The coefficient of thermal expansion was obtained by a dilatometric method and increased slightly with the increasing temperature, while decreased linearly with the increase in the Si/Ge content. Furthermore, the thermal conductivity was investigated via a laser flash apparatus. It decreased with rising temperature when the Ag content is smaller than 50%, whereas it increased with rising temperature when the Ag content exceeds 50%. The thermal conductivity of Si–Ge alloys decreased with rising temperature and reached the local minimum for Si–Ge alloys with an equiatomic ratio of Si and Ge. More importantly, the experimental results reveal that the thermal expansion that is related to volume can be estimated approximately by pure metals in Si–Ge–Ag alloys. However, this rule cannot be applied to specific heat and thermal conductivity, which is due to the influence of lattice vibration, electronic scattering, and microstructure.