31 July 2017 in Nanoscale
Sodium-ion batteries (SIBs) show great potential as alternative energy storage devices for next generation energy storage systems due to the deficiency of lithium resources. MoS2 is a promising anode material for SIBs due to its high theoretical sodium storage capability and large interspace for accommodating sodium ions with a larger ionic radius than lithium ions. However, bulk MoS2 exhibits a sluggish kinetics for the intercalation–deintercalation of sodium ions and large volume expansion, which result in poor cyclability and rate performance. In this study, we designed few-layered MoS2/C nanoflowers with expanded interspacing of MoS2–MoS2 planes using polyvinyl alcohol (PVA) as an intercalating reagent and a carbon precursor. Due to the unique nanostructure and larger interlayer spacing, the MoS2/C nanoflower electrode achieves a high reversible specific capacity of 400 mA h g−1 after 300 cycles at 500 mA g−1 for sodium-ion batteries (SIBs), showing a good cycling stability. The improved electrochemical performance suggests that the MoS2/C composite is a promising anode material for sodium ion storage.
24 June 2014 in Journal of Materials Chemistry A
A new one-pot and activation-free method was developed to synthesize high porosity biomass-derived carbon (HPBC) with uniform mesopores through sol–gel route. The as-prepared HPBC material possesses high surface area up to 949.85 m2 g−1 and high pore volume of 3.14 cm3 g−1. Cathodes with sulfur content of 81.29 wt% for Li–S batteries were prepared using the HPBC as a conductive matrix and a certain amount of space was preserved to accommodate the volume change during lithiation. When evaluated for electrochemical properties, the uniform pore structure of the HPBC afforded superior cyclability and rate performance for the Li–S batteries. An initial capacity of 922 mA h g−1 and a reversible capacity of 683 mA h g−1 were delivered after 100 cycles at a current density of 0.5 C. Specifically, a reversible capacity of 483 mA h g−1 was retained over 300 cycles at a current density of 1 C.
1 June 2014 in Journal of Power Sources
25 June 2018 in Journal of Materials Chemistry A
For further development of lithium–sulfur (Li–S) batteries, it is necessary to construct sulfur hosts with high sulfur utilization/loading ratios and moderate the shuttling effect of lithium polysulfides. Herein, we synthesized uniform pomegranate-like microclusters (MCs) via carbonization of a Prussian blue analogue; the MCs consist of homogeneously inlaid ultrafine Co nanoparticles in nitrogen-doped carbon subunits (Co-NPC). The hierarchical pore structure and high conductivity of the Co-NPC-MCs can immobilize sulfur species, and the ultrafine Co nanoparticles and doped nitrogen exert catalytic effects to improve the electrochemical performance of Li–S batteries. Therefore, the S/Co-NPC-MCs cathode exhibits a high initial capacity of 1192 mA h g−1 and 941 mA h g−1 after 200 cycles at 0.5C. It also exhibits excellent rate capacities at high rates of 1C and 2C; the reversible capacities remain at 650 mA h g−1 and 574 mA h g−1 after 400 cycles, respectively, demonstrating its great potential for practical applications.
8 September 2017 in Chemistry – A European Journal
19 November 2015 in Catalysis Science & Technology
Hydrangea-like NiCo2S4 hollow microspheres are proposed as an advanced electrocatalyst for both oxygen reduction and evolution reactions.