17 September 2025 in Nature Communications
Battery development pivots around understanding the complex processes governing battery operation and degradation. Most degradation pathways link structural and chemical inhomogeneities with strongly heterogeneous carrier transport at the nano- and microscale, which remains challenging to resolve with current operando imaging techniques. Here, we provide a data-driven perspective on using operando magnetic microscopy to examine the charge and discharge cycles in lithium and post-lithium batteries. Through quantitatively imaging ionic and electronic current distributions and probing the associated chemical reactions at the nanoscale, valuable insights into battery inhomogeneities and degradations can be gained. The approach facilitates spatially resolving heterogeneous redox reactions, buried current distributions, and mechanistic contributions to short-circuit endurance in batteries.
18 February 2025 in Proceedings of the National Academy of Sciences
Spacecraft using combustion engines require substantial amounts of oxygen for their propellant. The Moon could be a source of oxygen for rocket propellant, since the material composing the lunar surface can be processed to extract oxygen. However, little is known about overall energy requirements of the processes described in the literature for oxygen extraction from lunar regolith. This knowledge gap constrains the planning of lunar missions, since the scale of energy infrastructure required for oxygen production facilities is not well characterized. This study presents an energy consumption model for oxygen production via hydrogen reduction of the mineral ilmenite (FeTiO 3 ). We consider an end-to-end production chain starting from dry regolith as the feedstock. The production includes the following process steps: excavation, transportation, beneficiation, hydrogen reduction, water electrolysis, liquefaction, and zero boil-off storage. The model predicts the energy demand per kilogram oxygen produced based on adjustable parameters for each process step. As expected, the model indicates a strong dependence on feedstock composition. For regolith composed of 10 wt% ilmenite, the model predicts that a total of 24.3 (± 5.8) kWh is needed per kg of liquid oxygen produced. This study confirms that the hydrogen reduction and electrolysis steps have the highest energy requirements in the production chain. Sensitivity analysis reveals that the enrichment factor of the beneficiation process is the most critical parameter for optimizing energy utilization. Overall, this study provides a parameterized end-to-end model of energy consumption that can serve as a foundation for various production systems on the Moon.
24 September 2025 in Nanoscale Horizons
This review surveys research on solid-state battery materials and examines how various micro- and nanoscale characterization techniques can be used to diagnose degradation phenomena and guide strategies to mitigate degradation.
6 January 2026 in Advanced Functional Materials
We present the synthesis and study of the magnetic and electronic properties of NiFe 2 O 4 /γ‐Al 2 O 3 /SrTiO 3 heterostructure. The γ‐Al 2 O 3 /SrTiO 3 interface hosts a high‐mobility 2D electron gas (2DEG) with large spin‐orbit coupling, making it promising for spintronic and nano‐electronic device applications if it can be coupled to a suitable source of spin currents. For efficient spin‐charge conversion, a ferromagnetic insulator as a spin current source is more advantageous than a metallic/semiconducting ferromagnet. Here, we synthesize a ferrimagnetic insulating NiFe 2 O 4 (001) layer on γ‐Al 2 O 3 (001)/SrTiO 3 (001) using low‐temperature reactive sputtering at 150 °C without compromising the mobility and charge carrier density of the 2DEG at the γ‐Al 2 O 3 (001)/SrTiO 3 (001) interface. While γ‐Al 2 O 3 (8 nm)/SrTiO 3 is nonmagnetic, NiFe 2 O 4 (52 nm)/γ‐Al 2 O 3 (8 nm)/SrTiO 3 shows a well‐defined magnetic hysteresis loop at room temperature as well as at low temperatures. The sheet resistance of both γ‐Al 2 O 3 (8 nm)/SrTiO 3 and NiFe 2 O 4 (52 nm)/γ‐Al 2 O 3 (8 nm)/SrTiO 3 exhibits metallic behavior down to cryogenic temperatures, with a low temperature upturn driven by the combined effect of Kondo‐like scattering and weak antilocalization. Most importantly, NiFe 2 O 4 (52 nm)/γ‐Al 2 O 3 (8 nm)/SrTiO 3 behaves as a magnetic diode at low temperatures, and its rectification performance increases significantly with increasing magnetic field strength, giving rise to a robust magneto‐electronic rectification effect at low temperatures, which provides a first step toward the development of nanoscale all‐oxide heterostructures capable of efficient spin‐charge conversion.
26 November 2025 in Nature Reviews Clean Technology