29 May 2019 in IEEE Transactions on Industrial Electronics
There have been numerous approaches that have been proposed to enlarge the impedance range of haptic interaction while maintaining stability. However, enhancing the rate-hardness of haptic interaction while maintaining stability is still a challenging issue. The actual perceived rate-hardness has been much lower than what the users expect to feel. In this paper, we propose the successive force augmentation (SFA) approach, which increases the impedance range by adding a feed-forward force offset to the state-dependent feedback force rendered using a low stiffness value. This allows the proposed approach to display stiffness of up to 10 N/mm with Phantom Premium 1.5. It was possible to further enhance the rate-hardness by using the original value of virtual environment stiffness for feedback force calculation during the transient response followed by normal SFA. Experimental evaluation for multi-DoF virtual environment exhibited a much higher displayed stiffness and rate-hardness compared to conventional approaches. Two user studies revealed that the increase of rate-hardness due to SFA allowed the participants to have a faster reaction time to an unexpected collision with a virtual wall and accurately discriminate between four virtual walls of different stiffness.
21 January 2022 in IEEE Robotics and Automation Letters
Adding virtual damping to dissipate energy has been a major tool for designing stable haptic interfaces in most passivity-based approaches. However, virtual damping is known to dissipate a limited amount of energy. It even generates energy during high-velocity interaction because of the digitization effect, such as zero-order hold and quantization. Therefore, no proper energy dissipation element has been available to stabilize the interaction when the virtual damping is no longer functioning. This paper investigates the possibility of using virtual inertia as a complementary energy dissipation element of virtual damping for stable haptic interfaces. This paper analyzes the energy behavior of virtual inertia in the digital domain and finds that it can dissipate energy even in higher velocity interactions, unlike digital damping and digital springs. Furthermore, this paper proposes a unidirectional virtual inertia that can dissipate a considerable amount of energy compared with the conventional virtual inertia by storing energy and disappearing without returning it to the system. Simulation and experimental studies using a PHANToM haptic interface proved the performance of the proposed method.
21 June 2026 in Robotics and Autonomous Systems