Pengfei Li

Pengfei Li

Auto-generated profile, based on publicly available information

Pengfei Li

School of Astronautics, Northwestern Polytechnical University, Xian, China

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 August 2023 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
ZMZiran Meng
Ziran Meng
JZJun Zhu
Jun Zhu
Shancheng CaoShancheng Cao
Shancheng Cao
PLPengfei Li
Pengfei Li
CXChao Xu
Chao Xu
In existing research on rotating machinery diagnosis using graph neural networks, most methods are based on vibration analysis under contact sensor monitoring. However, the gathered vibration signal is sensitive to the increased mass of the sensor, and after prolonged close contact, the vibration sensor may cause structural damage to the object. A multi-sensor fusion based on modal analysis and graph attention network (MFMAGAT) for bearing fault diagnosis is suggested as a solution to these issues. First, we proposed a phase-based full-field non-contact measurement method based on direction-controlled pyramids to extract phase information at different scales and directions and use the phase information to characterize the vibration of the structure. Then, based on the vibration and acoustic signals of the characterized structure, we constructed a kernel function that can fuse the heterogeneous information, and its singular value decomposition can jointly characterize the response of the structure at same frequency bands from the video data and the acoustic data. Finally, considering that the decomposed features are independent and orthogonal to each other, the graph attention network is introduced at this time to find the weights among the components to jointly characterize the structural damage and improve the damage recognition accuracy. Comparison results show that the proposed method is effective and performs better than other conventional graph neural network diagnosis methods.

23 May 2024 in IEEE Sensors Journal
Verified
Journal Article
Closed access
PLPengfei Li
Pengfei Li
SXSuyu Xu
Suyu Xu
DXDafu Xu
Dafu Xu
CXChao Xu
Chao Xu
Electro-mechanical impedance (EMI)-based structural health monitoring (SHM) method has received the widespread attention in aerospace engineering. Nevertheless, commercial impedance measurement instruments are difficult for in-situ field applications to aircraft structures due to their bulkiness and high power-consumption. There is an urgent need to develop portable impedance measurement devices in order to popularize EMI-based SHM method from laboratories to practical applications. In this paper, a portable wireless impedance analyzer is proposed to improve the practicability of EMI-based SHM method. The analyzer allows for multi-channel impedance measurement of piezoelectric transducers (PZTs) with adjustable calibration resistors and the ambient temperature measurement of PZTs. The power-consumption of analyzer when performing the tasks was first assessed. Also, the robustness of wireless communication of analyzer was then evaluated based on the received signal strength indicator and packet loss rate. Subsequently, the ambient temperature and the impedance spectra of PZTs were measured using the analyzer. Additionally, a wing of an unmanned aerial vehicle was selected as the test structure, and the feasibility of analyzer to detect aircraft structural damages at the leading edge was validated. The proposed analyzer features high integration and low power-consumption. It is anticipated that a wireless monitoring network based on the analyzer can be established to implement field applications of the EMI-based SHM method in aircraft structures.

28 April 2023 in IEEE Sensors Journal
Verified
Journal Article
Closed access
PLPengfei Li
Pengfei Li
CXChao Xu
Chao Xu
Zhongqing SUZhongqing SU
Zhongqing SU
Nanocomposite piezoresistive strain sensors have offered new avenues for strain measurement of structures with significant deformations, large geometries or complex contours. The affordable and efficient spray coating technique, especially the air-atomized spray coating method, has considerable potential for batch production of such sensors. However, one of the most popular ways to fabricate sensors is manual spray coating, which not only has a low transfer efficiency, resulting in material waste and environmental pollution, but also makes it challenging to precisely control the homogeneity of sensor coatings, leading to inconsistent quality of existing sprayed sensors. Therefore, a mechanized air-atomized spray coating method is proposed to actualize the stable batch production of sprayed sensors, and spraying parameters are then determined to establish proper process conditions. Carbon black (CB) nanoparticle reinforced polyvinyl pyrrolidone (PVP) nanocomposites are prepared to fabricate CB/PVP strain sensors to validate the proposed method. Compared with the manual spray coating, the proposed method can manufacture CB/PVP coatings with uniform thickness distribution and micro-morphology. Additionally, the mechanical and electrical properties of CB/PVP nanocomposites are subsequently investigated to verify the consistency of coating quality using nanoindentation and four-probe techniques, respectively. Furthermore, the superior sensitivity and large strain range of CB/PVP strain sensors are evaluated by uniaxial tensile testing. In conclusion, the mechanized air-atomized spray coating method is not only time-saving, inexpensive and straightforward to implement, but also features wide applicability due to minor requirements for nanocomposites, thus laying a foundation for batch production and popularization of nanocomposite piezoresistive strain sensors.

21 April 2026 in Sensors and Actuators A: Physical
Verified
Journal Article
Closed access
PLPengfei Li
Pengfei Li
QYQi Yuan
Qi Yuan
QWQingqing Wang
Qingqing Wang
DJDiwu Jiang
Diwu Jiang
ZSZhongqing Su
Zhongqing Su
CXChao Xu
Chao Xu

3 December 2024 in Composites Communications
Verified
Journal Article
Closed access
PLPengfei Li
Pengfei Li
DJDiwu Jiang
Diwu Jiang
CXChao Xu
Chao Xu
Zhongqing SUZhongqing SU
Zhongqing SU

1 August 2026 in e-Journal of Nondestructive Testing
Verified
Journal Article
Open access
PDF file
JTJiaxing Tian
Jiaxing Tian
QWQingqing Wang
Qingqing Wang
PLPengfei Li
Pengfei Li
Menglong LiuMenglong Liu
Menglong Liu
ZSZhongqing Su
Zhongqing Su
Structural health monitoring (SHM) of spacecraft demands sensors to be not only adequately sensitive to subtle changes in structural status, but also resilient to extreme working conditions in outer space. This work presents a fully aerosol-jet-printed (AJP) flexible piezoresistive sensor, monolithically fabricated for robust, durable in-situ monitoring of orbiting space structures. The multi-layer architecture of the sensor is additively manufactured and cured directly onto the host space structure. It features an adhesive-free, space-resilient POSS-polyimide (PI) substrate and an encapsulation providing superior adhesion and intrinsic resistance to atomic oxygen and radiation. The nanocomposites-based sensing layer is printed and cured with an ink specially formulated with a synergistic nanocomposite blend including graphene, multi-walled carbon nanotubes (MWCNTs), and carboxylated MWCNTs (c-MWCNTs) within a polyamic acid (PAA) matrix. The graphene/CNT hybrid structure ensures a high-density, multi-dimensional conductive pathway, while the c-MWCNTs play a dual critical role: the carboxyl groups ensure excellent dispersion within the PAA solution to prevent nanocarbon agglomeration and in the meantime strengthen the interfacial bonding with the final PI matrix. A customized auxetic (re-entrant) geometric design innovatively enhances the performance of the sensor. By strategically concentrating stress in desired areas, this structure translates a given global strain into an amplified local deformation within the sensing element, which simultaneously boosts mechanical stretchability and remarkably increases the gauge factor to ~210, far surpassing conventional rectangular or serpentine geometries. Characterization confirms the performance of the sensor, showing high fidelity in detecting quasi-static strain and dynamic ultrasonic guided waves (20-500 kHz), as well as its proven survivability under simulated space environments (vacuum thermal cycling, atomic oxygen, and radiation). The practical SHM capabilities of the sensor are demonstrated in critical, application-relevant scenarios. Simulated on-orbit thermal strain measurement of spacecraft plate-like components via a distributed flexible sensing network achieves strain field reconstruction with a relative error of less than 5% subjected to a local loading under -50 ℃ to 100 ℃. Furthermore, during the hypervelocity impact (HVI) experiments on sensor-integrated flexible solar arrays, the sensor demonstrates effective acoustic emission (AE) signal acquisition. This capability enables impact localization with a spatial error of less than 3 mm, confirming the suitability of the sensors for monitoring large-area, fragile, non-planar space structures under micrometeoroid and orbital debris (MMOD) impacts. This research delivers a scalable, conformal sensing platform that uniquely integrates (i) an adhesive-free, space-resilient POSS-PI architecture, (ii) a synergistic nanocarbon composite with enhanced interfacial properties, and (iii) geometry-driven sensitivity enhancement. The demonstrated multifunctionality of the sensor—spanning static strain measurement, guided-wave reception, and AE-based impact localization—positions it as a transformative sensing device for next-generation, on-demand SHM of critical space assets.