A method to obtain long lengths of flexible, biaxially oriented substrates with smooth, chemically compatible surfaces for epitaxial growth of high‐temperature superconductors is reported. The technique uses well established, industrially scalable, thermomechanical processes to impart a strong biaxial texture to a base metal. This is followed by vapor deposition of epitaxial buffer layers (metal and/or ceramic) to yield chemically compatible surfaces. Epitaxial YBa2Cu3Ox films grown on such substrates have critical current densities exceeding 105 A/cm2 at 77 K in zero field and have field dependencies similar to epitaxial films on single crystal ceramic substrates. Deposited conductors made using this technique offer a potential route for the fabrication of long lengths of high‐Jc wire capable of carrying high currents in high magnetic fields and at elevated temperatures.
In-plane-aligned, c axis-oriented YBa 2 Cu 3 O 7 (YBCO) films with superconducting critical current densities Jc as high as 700,000 amperes per square centimeter at 77 kelvin have been grown on thermomechanically rolled-textured nickel (001) tapes by pulsed-laser deposition. Epitaxial growth of oxide buffer layers directly on biaxially textured nickel, formed by recrystallization of cold-rolled pure nickel, made possible the growth of YBCO films 1.5 micrometers thick with superconducting properties that are comparable to those observed for epitaxial films on single-crystal oxide substrates. This result represents a viable approach for the production of long superconducting tapes for high-current, high-field applications at 77 kelvin.
High-resolution in situ x-ray-diffraction measurements were made of the lattice constants of as it was heated and cooled through the orthorhombic-tetragonal transition at a series of pressures. The transition is sharp, continuous, and reversible in temperature and pressure. As pressure is reduced from 1.0 to 0.005 atm, the transition temperature falls from 676±5 °C to 521±10 °C while oxygen content at the transition falls from 6.66±0.01 to 6.59±0.02. Dilation along the c axis is observed as oxygen is removed. Under helium, an irreversible but time-dependent orthorhombic-to-tetragonal transition occurs during heating.
1 December 2005 in Metallurgical and Materials Transactions A
Thin‐film epitaxialstructures of BaSi2, BaO, and BaTiO3, have been grown on the (001) face of silicon using ultrahigh vacuum, molecular beam epitaxy(MBE) methods. Source shuttering for the metal species coordinated with a pulsed, or cyclic, oxygen arrival at the growingoxide surfaces significantly improves film quality. The epitaxialgrowth of BaO is accomplished without silica formation at the BaO/Si interface by stabilizing BaSi2 as a submonolayer template structure.Insitu ellipsometric measurements of the indices of refraction for BaO and for BaTiO3 in a BaTiO3/BaO/Si multilayer gave n=1.96 for BaO and n=2.2 for the BaTiO3, within 10% of their bulk values. These values suggest that this structure can be developed as an optical waveguide. BaO is impermeable to silicon for films as thin as 10 nm at temperatures as high as 800 °C, and good epitaxy can be obtained from room temperature to 800 °C. The epitaxy is such that BaTiO3(001)∥BaO(001)∥Si(001) and BaTiO 3〈110〉∥BaO〈100〉∥Si〈100〉.
1 February 1997 in Physica C: Superconductivity and its Applications