29 July 2011 in Journal of the Optical Society of America B
We demonstrate a novel (to the best of our knowledge) whispering-gallery-mode fiber laser, pumped and gain coupled by evanescent waves, by inserting a bare optical fiber into a glass capillary filled with dye solution. The energy threshold properties of the lasers, including the energy threshold that varied with the refractive index (RI) of the dye solution for different fiber diameters and the produced length of the lasing emission along the fiber axis, are then investigated. We find experimentally that the energy threshold is very sensitive to the RI of the dye solution and the fiber diameter, and the produced length of the lasing emission is dependent on the dye concentration and the RI of the dye solution. The optical gain of a circular microcavity in the evanescent-wave pumping scheme is analyzed by introducing a Gaussian distribution function of the pump light, and various energy losses related to the microcavity are considered, which leads to a threshold energy formula. The formula for determining the produced length of the lasing emission is derived by introducing an attenuated factor in the threshold energy formula. The experimental results are in good agreement with the calculations.
15 May 2013 in Optics Express
The polarization characteristics of Whispering-Gallery-Mode (WGM) fiber lasers based on evanescent-wave-coupled gain are investigated. For the laser gain is excited by side-pumping scheme, it is found that the polarization property of lasing emission is simply dependent on the polarized states of the pump beams. The polarization property of lasing emission depends on the propagating situation of the pump beams in an optical fiber if the laser gain is excited by evanescent-wave pumping scheme, that is, if the pump beams within the fiber are meridional beams, the lasing emission is a transverse electric (TE) wave that forms a special radial polarization emission. However, if the pump beams within the fiber are skew beams, both transverse magnetic (TM) and TE waves exist simultaneously in lasing emission that forms a special axially and radially mixed polarization emission. Pumped by skew beams, the wave-number differences between TE and TM waves are also investigated quantitatively, the results demonstrate that the wave-number difference decreases with the increase of the fiber diameter and the refractive index (RI) of the cladding solution. The observed polarization characteristics have been well explained based on lasing radiation mechanism of WGM fiber laser of gain coupled by evanescent wave.
21 June 2016 in Scientific Reports
A visualization and quantification optical method for measuring binary liquid diffusion coefficient (D) based on an asymmetric liquid-core cylindrical lens (ALCL) is introduced in this paper. Four groups of control experiments were performed to verify the influences of diffusing substance category, concentration and temperature on diffusion process and the measured D values were well consistent with data measured by Holographic interferometry and Taylor dispersion methods. The drifting of the diffusion image recorded by CCD reflects the diffusion rate visually in an easily understandable way. This optical method for measuring D values based on the ALCL is characterized by visual measurement, simplified device and easy operation, which provides a new way for measuring liquid D value visually.
1 March 2017 in Optics Express
We design and fabricate an aplanatic double liquid-core cylindrical lens (DLCL), which is used to measure the binary liquid diffusion coefficient (D). The front lens of the DLCL is used as both a diffusion cell and a key imaging element; the refractive index (RI) of liquid filled in its core can be measured in the way of spatial resolution. The rear lens of the DLCL is used as an aplanatic component, and either the RI position of spherical aberration (SA) or the SA in a range of RI caused by the front lens can be regulated by selecting the liquid, of which RI is pre-prepared and filled in the rear liquid core. Equipped with the aplanatic DLCL, two methods have been applied to measure the D value of 0.33mol/L KCL aqueous solution at temperature 298.15K. The first method derives D value precisely from the drift rate of diffusion image and the measured D is 1.8508 × 10−5 cm2/s. Meanwhile, the second method obtains the D value rapidly by analyzing an instantaneous diffusion image and the measured D is 1.8619 × 10−5 cm2/s. The measured values are in good agreement with the literature value, demonstrating that the designed DLCL works well in measuring liquid diffusion coefficients.
25 August 2015 in Optics Express
A novel optical method was applied to measure the binary liquid diffusion coefficient (D) quickly. Equipped with an asymmetric liquid-core cylindrical lens (ALCL), the spatially resolving ability of the ALCL in measuring refractive index of liquid was utilized to obtain the gradient distribution of the liquid concentration along diffusive direction. Based on Fick’s second law, the D value was then calculated by analyzing diffusion images. It was worth mentioning that only one instantaneous diffusive image was required to measure D value by the method, reducing the measurement time greatly from several hours in traditional methods to a few seconds. The diffusion coefficients of ethylene glycol diffusing in pure water, at temperatures from 288.15 to 308.15 K, were measured by analyzing instantaneous diffusion images, the results were consistent well with the values measured by using holographic interferometry and Taylor dispersion methods. The method is characterized by faster measurement, direct observation of diffusive process, and easy operation, which provides a new method in measuring diffusion coefficient of liquids rapidly.
10 March 2016 in Applied Optics
We design and fabricate an asymmetric liquid-core cylindrical lens (ALCL), which is used to measure the binary liquid diffusion coefficient (). Acting as both diffusion cell and key imaging element, ALCL is of the function to measure the refractive index (RI) of liquid filled in its core in the way of spatial resolution. Comparing the ALCL with a symmetric liquid-core cylindrical lens (SLCL), the spherical aberration is reduced from about 300 μm (SLCL) to less than 5 μm (ALCL) when the RI of filled liquid is near 1.333, while the measurement accuracy of the RI of the ALCL is superior to 0.0002, which is much better than that of the SLCL. Equipped with the ALCL, the value of triethylene glycol diffusing in water is measured at 25°C. The result is , a value very close to the literature value. The rational design of ALCL gives the optical method for measuring the value good measurement precision and direct observation of the diffusive process as well as a simple experimental instrument.