Cooperative intelligent transport systems (C-ITS) continue to be developed to enhance transportation safety and sustainability. However, the communication of vehicle-to-everything (V2X) systems is inherently open, leading to vulnerabilities that attackers can exploit. This represents a threat to all road users, as security failures can lead to privacy violations or even fatalities. Moreover, a high fatality rate is correlated with soft-mobility road users. Therefore, when developing C-ITS systems, it is important to broaden the focus beyond connected vehicles to include soft-mobility users and legacy vehicles. This work presents a new approach developed in the context of emerging hybrid networks, combining intelligent transport systems operating in 5.9 GHz (ITS-G5) and radio-mobile cellular technologies. Two protocols were implemented and evaluated to introduce security guarantees (such as privacy and integrity) in communications within the developed C-ITS hybrid environment. As a result, this work securely integrates G5-connected ITS stations and soft-mobility users through a smartphone application via cellular networks. Commercial equipment was used for this goal, including on-board and roadside units. Computational, transmission and end-to-end latency were used to assess the system’s performance. Implemented protocols introduce an additional 11% end-to-end latency in hybrid communications. Moreover, workflows employing hybrid communications impose, on average, an extra 28.29 ms of end-to-end latency. The proposal shows promise, as it reaches end-to-end times below the latency requirements imposed in most C-ITS use cases.
In a heterogeneous cellular networks environment, users behaviour and network deployment configuration parameters have an impact on the overall Quality of Service. This paper proposes a new and simple model that, on the one hand, explores the users behaviour impact on the network by having mobility, multi-service usage and traffic generation profiles as inputs, and on the other, enables the network setup configuration evaluation impact on the Joint Radio Resource Management (JRRM), assessing some basic JRRM performance indicators, like Vertical Handover (VHO) probabilities, average bit rates, and number of active users, among others. VHO plays an important role in fulfilling seamless users sessions transfer when mobile terminals cross different Radio Access Technologies (RATs) boundaries. Results show that high bit rate RATs suffer and generate more influence from/on other RATs, by producing additional signalling traffic to a JRRM entity. Results also show that the VHOs probability can range from 5 up to 65 %, depending on RATs cluster radius and users mobility profile.
Partially, the future of mobile and cellular networks will be about energy consumption savings, at the network infrastructure side. In the heterogeneous cellular networks environment, these can be achieved based on bandwidth adaptation, discontinuous transmission, relays, or even Base Stations (BSs) shutdown when possible. This paper proposes an approach for power savings using Vertical Handovers (VHOs) among different Radio Access Technologies (RATs), based on Radio Resource Management. The presented solution use a utility function focused on the energy efficiency of a given BS and RAT. An active VHO trigger mechanism is also proposed to provide RF power savings by handover mobile terminals to the most efficient RAT. Based on a power model proposed by the ICT-EARTH project, it is possible to translate RF power savings into system level ones. Results show that VHOs RF power gains range up to 46%, and up to 13% at the BS system level.
The rapid expansion of fiber optic networks and services, which sees a large number of circuits enabled and disabled each day, introduces a significant complexity for operators to identify fibers that have and do not have attached clients. The service level agreements prevent operators from disconnecting circuits without absolute assurance that no clients are attached. We propose a non-intrusive multichannel fiber detector to facilitate the operation and maintenance of the optical networks. The optical distribution frame usually does not have any power available, thus, the proposed device operates without batteries and is powered by near field communication (NFC). Device installation does not require fiber disconnection or communication interruption, and introduces less than 1 dB insertion loss to detect optical signals down to -30 dBm. In order to read multiple fiber channel status, an NFC-enabled smartphone is used to power the device and measure the signal levels of each channel.