Laser-accelerated ion beams can be used in many applications and, especially, to initiate nuclear reactions out of thermal equilibrium. We have experimentally studied aneutronic fusion reactions induced by protons accelerated by the Target Normal Sheath Acceleration mechanism, colliding with a boron target. Such experiments require a rigorous method to identify the reaction products (alpha particles) collected in detectors among a few other ion species such as protons or carbon ions, for example. CR-39 track detectors are widely used because they are mostly sensitive to ions and their efficiency is near 100%. We present a complete calibration of CR-39 track detector for protons, alpha particles, and carbon ions. We give measurements of their track diameters for energy ranging from hundreds of keV to a few MeV and for etching times between 1 and 8 h. We used these results to identify alpha particles in our experiments on proton-boron fusion reactions initiated by laser-accelerated protons. We show that their number clearly increases when the boron fuel is preformed in a plasma state.
Modifications of the spatial distribution of polarization in the focal spot of a picosecond-pulse beam after its amplification by a nanosecond pump in a plasma have been observed experimentally. The spatially resolved measurement of beam polarization was achieved thanks to the simultaneous imaging of the focal spot with two cameras, one of which was equipped with a polarizer, permitting to determine the polarization characteristics. The mean modification of the picosecond-pulse beam polarization after crossing the nanosecond beam depends on its mean amplification by crossed-beam energy transfer. A fine analysis of the spatial polarization modification reveals a large dispersion of the speckle polarization modification after their amplification. This dispersive modification originates from the spatial smoothing of the two crossing beams.
15 February 2018 in Plasma Physics and Controlled Fusion
Crossed-beam energy transfer between three laser beams has been experimentally investigated in a flowing plasma. Time-evolution measurements of the amplification of a first beam by a second beam highlighted the inhibition of energy transfer by hydrodynamic modifications of the plasma in the crossing volume due to the propagation of a third beam. According to 3D simulations and an analytical model, it appears that the long-wavelength expansion-velocity fluctuations produced by the propagation of the third beam in the crossing volume are responsible for this mitigation of energy transfer. This effect could be a cause of the over-estimation of the amount of the transferred energy in indirect-drive inertial confinement fusion experiments. Besides, tuning such long-wavelength fluctuations could be a way to completely inhibit CBET at the laser entrance holes of hohlraums.
With the arrival of megajoule class laser facilities, the features of laser-produced plasmas are evolving toward unprecedented high electron temperatures reached in the environment of a cm-scale indirect-drive Hohlraum for a few tens of nanoseconds. In this context, the need for in situ experimental characterization of the plasma parameters becomes critical in order to test hydrodynamics simulations in these novel conditions. Taking advantage of the progress achieved in the last 40 years, Thomson scattering has become a classic diagnostic in the characterization of laser produced plasmas. However, the many beam configuration of the megajoule scale experiments makes the measurements increasingly complex because the Thomson scattering signals produced by the 351 nm heaters themselves dominate the plasma emission around 263 nm, a wavelength range typically of interest when a 4ω Thomson probe is used. This paper reviews the requirements for and the potential of a 4ω Thomson scattering system to be operated on such 351 nm megajoule scale facilities in order to characterize the hot (Te > 3 keV) plasmas produced in the indirect-drive irradiation of a Hohlraum. It is found that the configuration of the diagnostic could be optimized in order to enable the detection of the ion acoustic resonances over a large domain of plasma parameters. The results for the electron plasma wave resonances are also given.