1 January 2012 in Computer Methods in Applied Mechanics and Engineering
International audienceMany models in polymer processing and composites manufacturing are defined in degenerated three-dimensional domains, involving plate or shell geometries. The reduction of models from 3D to 2D is not obvious when complex physics are involved. The hypotheses to be introduced for reaching this dimensionality reduction are sometimes unclear, and most of possible proposals will have a narrow interval of validity. The only getaway is to explore new discretization strategies able to circumvent or at least alleviate the drawbacks related to mesh-based discretizations of fully 3D models defined in plate or shell domains. An in-plane–out-of-plane separated representation of the involved fields within the context of the Proper Generalized Decomposition allows solving the fully 3D model by keeping a 2D characteristic computational complexity. Moreover the PGD features allow the introduction of many extra-coordinates, as for example the orientation of the different laminate plies, without affecting the solvability of the resulting multidimensional model
26 September 2012 in International Journal of Material Forming
1 May 2013 in International Journal of Solids and Structures
16 April 2015 in Langmuir
1 April 2012 in European Journal of Computational Mechanics
Many models in polymer processing and composites manufacturing are defined in degenerated three-dimensional domains (3D), involving plate or shell geometries. The reduction of models from 3D to two-dimensional (2D) is not obvious when complex physics or particular geometries are involved. The hypotheses to be introduced for reaching this dimensionality reduction are unclear, and most of the possible proposals will have a narrow interval of validity. The only gateway is to explore new discretisation strategies able to circumvent or at least alleviate the drawbacks related to mesh-based discretisations of fully 3D models defined in plate or shell domains. Appropriate separated representation of the involved fields within the context of the proper generalised decomposition allows solving the fully 3D model by keeping a 2D characteristic computational complexity.
1 January 2016 in Review of Scientific Instruments
In this paper, we demonstrate how to use a personal computer sound card to develop an experimental platform for evaluating the jettability and jetting behavior of inkjet fluids. The test fluid is driven out of a nozzle acoustically using a loudspeaker, forming a jet. The subsequent jet breakup process is then captured using a stroboscopic light source and a camera. Instead of using a delay generator as in previous work, the current setup uses a computer sound card and audio amplifier to (i) generate actuation waveforms of arbitrary shapes and (ii) synchronize the jet actuation and imaging with a time precision close to 5 μs. To correct for any signal distortions caused by the built-in high pass filters of the sound card and amplifier, a numerical filter is created and applied before sending the desired signal to the sound card. Such correction method does not require physically modifying the hardware of the sound card or amplifier and is applicable to different waveforms and filters provided that the transfer function is correctly identified. The platform has been tested using 20% (v/v) glycerol in water as a model fluid. Combining this platform with digital image analysis further enables a quantitative assessment of parameters such as the volumes and positions of the jet and drop that are important for quality control and development of new ink formulations.