9 December 2020 in IEEE/ASME Transactions on Mechatronics
Direct-driven electro-hydraulic systems have a wide range of applications owing to their advantages of energy-savings and relatively high control flexibilities in comparison with classic variable displacement pump-controlled hydraulic systems. However, the control accuracy is limited by the inherent nonlinear hydraulic dynamics. Additionally, the pump flow rate may become nonlinear at low pump speeds, causing large pressure-related flow deviations, thereby limiting the improvement of motion control accuracy. Unfortunately, the pump flow nonlinearity has been ignored or over-simplified without effective modeling in most studies so far. To improve the control accuracy of direct-drive hydraulic systems, a high-precision control strategy must be designed to deal with the nonlinear characteristics and resolve the issue of nonlinear pump flow at low speeds. This study proposes an adaptive robust motion control strategy for a servo direct-driven electro-hydraulic system, using adaptive pump flow rate model compensation. A backstepping integrated direct/indirect adaptive robust controller is designed to deal with the dynamic nonlinearities and uncertainties, which guarantees the stability of the entire hydraulic system. Furthermore, a parameterized polynomial fitting modeling strategy is proposed to accurately describe the nonlinear characteristics of the pump flow rate. Therefore, the uncertain parameters are adjusted in real-time, achieving satisfactory parameter estimations and model compensation for asymptotic motion tracking. Theoretical proof and comparative experiments demonstrate the advantages of the proposed control strategy with adaptive polynomial fitting model compensation for high-precision motion control.
10 August 2021 in IEEE Transactions on Industrial Electronics
The independent metering system decouples the meter-in and meter-out flows of the chamber, giving extra control flexibility and can reducing energy consumption while keeping motion control accuracy. The control performance of the independent metering system is significantly determined by the valve characteristics.Valve nonlinearities, such as deadband, nonlinear flow gain, and leakage, may restrict the control accuracy. To address the issue and improve the system control precision, the nonlinearities of the valve need to be further modeled. In this article, a nonlinear valve flow model is proposed to accurately depict the relationships between the flow rate, pressure drop, and input voltage. The valve deadband is compensated by the static inverse function, while a certain polynomial projection function is used to mimic the nonlinear flow curve outside the deadband. To deal with uncertainties and nonlinearities in the independent metering system, an adaptive robust control approach is synthesized. The least-squares estimation law is adopted to online adapt the valve parameter and other system parameters. Comparative experiments were carried out to illustrate the effectiveness of the proposed approach. The results show that the valve flow nonlinearities are further captured by the proposed model, and the independent metering system performed a higher level control precision.
22 February 2024 in IEEE/ASME Transactions on Mechatronics
Regarding the motion control of independent metering actuators, energy efficiency can be improved while achieving accurate motion control through dynamic back pressure regulation. However, it increases the requirements for compensating the pressure dynamics, which includes the fluid compressibility part and the valve model part. Since the fluid compressibility and the valve flow characteristics may vary with the temperature, oil state, or valve wear, adaptive compensation is necessary to further handle the uncertainties. In this article, an adaptive robust control approach is proposed to further compensate for the uncertainties in the pressure dynamics in the motion control of the independent metering actuator. Specifically, to reduce the deviation in the valve flow model, an adjusting coefficient and a lumped error term are introduced to modify the nonlinear nominal flow model. Then, the effective bulk modulus and the initial control volume are estimated online to enhance the transient control performance when the pressure changes rapidly. The least squares estimation law is employed to directly adapt the denominator parameter and the input parameter in the pressure dynamics. Comparative experiments demonstrate that the approach successfully reduces the uncertainties in the pressure dynamics, leading to an improved transient and steady-state tracking performance in motion and pressure control.