1 March 2022 in Journal of Central South University
1 September 2017 in IOP Conference Series: Materials Science and Engineering
The automation control system is of great significance and efficient to control the thickness precision in hot strip rolling process. In this paper, the relationship among thickness, rolling force and roll gap in hot strip rolling process was studied. The reason for the bad hit rate of thickness for the first format-changed blank was analyzed. The adjustment of thickness in the hot rolling process was also studied. The decrease of rolling force and the increase of roll gap can increase the exit thickness of the hot-rolled strip. As the thickness control system and mechanism for hot rolling process are complicated, there are much work need to be done.
19 May 2022 in Steel Research International
5 November 2021 in Steel Research International
16 August 2018 in IOP Conference Series: Materials Science and Engineering
In recent years, the high strength steel has been used widely to prove the advantage of lightweight used in automotive industry. The drawbacks occurred in the stamping procedure are thinning, springback and so on. And many process parameters affect the forming quality significantly, such as friction coefficient and blank holder force (BHF). In this paper, the effect of process parameters on the forming defects is investigated. The design of test was utilized and the finite element model was established and applied. The aim of this study is to get a further understanding on the stamping of high strength steel.
18 February 2019 in IOP Conference Series: Materials Science and Engineering
The application of high strength steel on automobile becomes more and more popular. So it is necessary to study the formability. In this paper, the effect of Bauschinger was studied. The material employed in this study is DH780. The influence of Bauschinger related parameters on material property was analyzed by changing the parameter values. Then, the effect on the springback behavior was studied after the finite element analysis. The part used was a longitudinal beam used in the automobiles. The related Bauschinger related parameters were Transient Softening Rate, Stagnation Ratio, Young's Reduction Factor and Young's Reduction Rate. The results were achieved after the analysis. The transient softening rate K shows a significant effect on the stress-strain curves. The increase of transient softening rate K leads to the decrease of reversed stress and the increase of springback.