24 February 2025 in ACS Applied Materials & Interfaces
Microgels offer broad applications in bioengineering due to their customizable properties, supporting innovations in mechanobiology, tissue engineering, drug delivery, and cell therapy. This study focuses on characterizing ionically cross-linked alginate microgels using a nanoindentation technique, enabling precise assessment of their mechanical properties at the microscale. We report on the microfluidic fabrication of alginate microgels with varying sizes at different cross-linker concentrations and on the mechanical characterization of the resulting microgels in terms of Young's moduli as well as viscoelastic behavior. Measurements conducted using dynamic nanoindentation reveal that microgel elasticity is strongly influenced by the ionic composition of the surrounding media, in particular, the concentration of calcium and sodium. We demonstrate that the highest Young's modulus observed for ionically cross-linked alginate microgels is in deionized water (7.2 ± 0.9 kPa). A drastic softening effect is observed when the calcium cross-linked microgels are placed into a storage buffer containing divalent ions (0.7 ± 0.1 kPa) and cell culture media consisting of Dulbecco's Modified Eagle Medium (0.2 ± 0.1 kPa) with fetal bovine serum (0.4 ± 0.1 kPa). High concentrations of sodium were found to disrupt ionic cross-links, decreasing stiffness and increasing viscosity, with reversible effects observed upon switching back to deionized water. These findings highlight the importance of media selection for applications requiring mechanical stability, and we provide guidelines for measuring the mechanical properties of microgels in a robust manner that is applicable to a wide range of different conditions.
13 May 2025 in ACS Applied Materials & Interfaces
Achieving reversible stiffening of biopolymer networks in a controlled manner remains a challenging topic in materials science, especially when trying to assess the following changes in mechanical material properties in real time. To address these challenges, we here utilize a custom-made measurement setup that allows us to manipulate the cross-linking state of alginate-based hydrogels in situ while quantifying the achieved alterations in the viscoelastic response of the biopolymer networks. Interpolymer connections in the biopolymer networks are created by a combination of light-induced, covalent cross-links, ionic cross-links, and DNA-based cross-links, where the latter two can be successfully removed again by employing either chelating agents (e.g., ethylenediaminetetraacetic acid and citrate) or suitable displacement DNA strands. In part, this range of the different cross-linking options mentioned is inter alia made possible by incorporating the glycoprotein mucin into the alginate system, which also allows for a range of different starting (∼0.2-400 Pa), intermediate (∼25 Pa-1.6 kPa), and final stiffnesses (∼4 Pa-1.2 kPa) of the mixed hydrogel matrix. At the same time, the presence of mucins (1-4% (w/v)) in the biopolymer mixture enhances the properties of the cytocompatible hydrogel by improving its antibacterial characteristics. Such well-controllable alginate/mucin networks with dynamically switchable mechanical properties will likely find broad applications in cell cultivation studies or tissue engineering applications.
20 March 2026 in International Journal of Biological Macromolecules
The mucosa lining all wet epithelial tissues in our body is mainly established by mucin glycoproteins and constitutes the first line of defense that controls the selective uptake of substances into sub-mucosal tissues. However, this biological barrier faces a broad range of environmental pollutants. Micro- and nanoplastics are ubiquitous contaminants that occur in our food and beverages, and they are still used as additives in cosmetics and healthcare products. Whereas there are clear indications that an exposure to microplastics can create health issues for humans, little is known about the microscopic mechanisms that are responsible for this. In this study, we investigate the selective permeability properties of mucus reconstituted from different mucin sub-types, i.e., model systems of the mucosal barriers in the lungs, the intestine, and the stomach, and evaluate alterations in this permeability as brought about by nanoplastic contaminations. Particularly, we elucidate how nanoplastic particles remodulate the molecular mechanisms governing the selective filtration capabilities of mucin networks. We find that nanoplastic can adsorb to the mucosal interface, and this effect is particularly pronounced for cationic particles. As a consequence, the surface potential of the mucosal interface is changed and the barrier properties of the mucosal hydrogel towards small molecules are altered by introducing new, hydrophobic binding sites. Together, those effects can be expected to influence the translocation of physiologically important molecules across mucus which may affect, for instance, nutrient uptake. Furthermore, nanoplastic-induced alternations of the mucosa's protective function should be considered for drug delivery applications, where the mucosal barrier needs to be navigated by therapeutic agents.
29 July 2026 in Advanced Materials
Most commercial adhesives are still petroleum‐based. Despite extensive efforts to develop sustainable alternatives, bio‐based adhesives often require chemical modification of their components, or they fail to achieve rapid, high‐performance bonding. Here, we report a fully bio‐based adhesive derived primarily from a (poly)saccharide extract obtained from the berries of the hemi‐parasitic plant mistletoe ( Viscum album ). This (poly)saccharide extract is supplemented with tannic and malic acid without any further chemical functionalization. Through a combination of heat‐treatment and rapid curing, the developed adhesive exhibits remarkable bonding strength across diverse substrates—including various types of wood and metal, glass, and polytetrafluoroethylene (Teflon)—and under various conditions. Furthermore, if samples are separated by force, the remaining adhesive layers can be reactivated via heat‐treatment to allow for efficient re‐bonding of the adherends. The fully bio‐based formulation not only enables multiple repair cycles but also valorizes a parasitic plant, thereby serving as an eco‐friendly, high‐performance alternative to petroleum‐derived adhesives.