9 August 2022 in International Journal of Extreme Manufacturing
Electrochemical jet machining (EJM) encounters significant challenges in the microstructuring of chemically inert and passivating materials because an oxide layer is easily formed on the material surface, preventing the progress of electrochemical dissolution. This research demonstrates for the first time a jet-electrolytic plasma micromachining (Jet-EPM) method to overcome this problem. Specifically, an electrolytic plasma is intentionally induced at the jet-material contact area by applying a potential high enough to surmount the surface boundary layer (such as a passive film or gas bubble) and enable material removal. Compared to traditional EJM, introducing plasma in the electrochemical jet system leads to considerable differences in machining performance due to the inclusion of plasma reactions. In this work, the implementation of Jet-EPM for fabricating microstructures in the semiconductor material 4H-SiC is demonstrated, and the machining principle and characteristics of Jet-EPM, including critical parameters and process windows, are comprehensively investigated. Theoretical modeling and experiments have elucidated the mechanisms of plasma ignition/evolution and the corresponding material removal, showing the strong potential of Jet-EPM for micromachining chemically resistant materials. The present study considerably augments the range of materials available for processing by the electrochemical jet technique.
15 April 2025 in Journal of Materials Processing Technology
20 May 2025 in International Journal of Machine Tools and Manufacture
1 September 2023 in Journal of the Electrochemical Society
Electrochemical machining (ECM) is an essential non-traditional industrial shaping technology. An in-depth understanding of ECM anodic dissolution is fundamentally important for process parameter design and optimization. However, the existing electrochemical setups face challenges in achieving efficient analysis of these processes. In this work, a new flow cell has been developed via simulation-based design and 3D printing that demonstrates comprehensive advantages in terms of improved electric and flow conditions, measurement technique versatility, and production simplicity at low cost. Simulations are performed to reveal particular characteristics of the proposed cell in terms of physical distributions and to determine its key dimensions with high efficiency. The stereo lithography technique is used to realize the complex design and fabricate the proposed flow cell, thus ensuring ease of accessibility. Furthermore, the effectiveness of the developed cell is verified experimentally by examining the anodic behavior of typical metals in common ECM electrolytes, using Fe and SS304 stainless steel as examples. Test results show that information on the polarization behavior, current efficiency, anodic interface structure, and surface finish can be obtained conveniently and the results agree with previous findings, demonstrating the potential of the developed cell to perform high throughput tests to study ECM fundamentals.
15 May 2023 in Materials Science and Engineering: A