The formation of nonmetallic inclusions in the solidification process can essentially influence the properties of steels. Computational simulation provides an effective and valuable method to study the process due to the difficulty of online investigation. This paper reviews the modeling work of inclusion formation during the solidification of steel. Microsegregation and inclusion formation thermodynamics and kinetics are first introduced, which are the fundamentals to simulate the phenomenon in the solidification process. Next, the thermodynamic and kinetic models coupled with microsegregation dedicated to inclusion formation are briefly described and summarized before the development and future expectations are discussed.
23 July 2020 in Metallurgical and Materials Transactions A
During the solidification of steel, phosphorus strongly segregates in the interdendritic liquid phase. In the continuous casting process, even low levels of P may have a detrimental effect on the final product quality. However, phosphorus is partly added up to 0.10 wt pct to improve the mechanical properties of advanced steel grades nowadays, e.g., High-Strength Interstitial-Free (HSIF). To provide new experimental data for the development of thermodynamic databases and solidification models for P alloyed steel grades, phase equilibria in the Fe-P and Fe-C-P key systems were studied up to 1550 °C using differential scanning calorimetry (DSC) and high temperature laser scanning confocal microscopy (HT-LSCM). Special focus was placed on solid/liquid equilibrium temperatures in the Fe-rich part of the binary Fe-P system between 0.025 and 9 wt pct P. In the ternary system, three isoplethal sections with 0.10 mass pct. P, 0.20 mass pct. C and constant mass percent ratio P/C of 2 were investigated. In the latter section, HT-LSCM observations were linked with DSC signals to optically identify present phase stabilities. Particularly at [pct P] < 1, significant differences between performed measurements and calculated phase equilibrium temperatures using thermodynamic assessments from the literature were identified. In all ternary sections, the experiments indicate less influence of P on the hypo-peritectic range compared to the thermodynamic calculations.
High-temperature oxidation phenomena play a crucial role in steel production and processing. The development of new alloying concepts, the modification of production routes due to the decarbonization of steelmaking, and increasing quality demands will additionally stimulate research activities on high-temperature oxidation. Within the scope of this publication, the oxidation behavior of an unalloyed steel was investigated by means of thermogravimetric (TG) and metallographic analysis. The TG measurements were performed with a simultaneous thermal analyzer in combination with a water vapor generator and a mass spectrometer for quality control. Experiments were conducted in a temperature range from 900 to 1200 °C under various oxidation atmospheres, containing synthetic air and water vapor, with different linear flow rates of the oxidizing medium. According to the thermogravimetric data, an evaluation method is introduced to obtain direct kinetic data for linear and parabolic scale growth. The influence of the experimental parameters on high-temperature oxidation is discussed in detail.
7 April 2023 in Journal of Materials Research and Technology