Ivan A. Golubev

Ivan A. Golubev

Auto-generated profile, based on publicly available information

Ivan A. Golubev

Peter the Great St. Petersburg Polytechnic University

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 December 2020 in Journal of Mining Institute
Verified
Journal Article
Open access
PDF file
ИГИ. А. Голубев
И. А. Голубев
AGAndrei Golubev
Andrei Golubev
АLАnatolii Laptev
Аnatolii Laptev
During the primary treatment of oil, gas and water, complications arise associated with the presence of hard water-oil emulsions, which cause an increase in fluid pressure in the gathering systems, pipeline damage, as well as difficulties in gas separation and preliminary water discharge at the preliminary discharge unit (PRU). Additional problems arise during transportation of highly paraffinic oils associated with the crystallization of paraffin in the flow path of the oilfield equipment and on the inner surface of pipes, leading to a drop in the productivity of pipelines. Article discusses the technology of magnetic-reagent treatment of water-oil media, which allows intensifying the processes of primary oil treatment at the facilities of its production. Bench and pilot tests have shown the ability of the magnetic field to accelerate oil demulsification processes, increasing the percentage of separated water during subsequent settling, and to reduce asphalt-resin-paraffin deposits (ARPD) on the inner surface of oil and gas field equipment. Mechanism of the magnetic field effect on water-oil media is described. Effect of treatment on the integrity of the armour shells of oil-water emulsions was studied. Various modes of magnetic treatment have been investigated with evaluation of its effectiveness. It is shown that the best effect is achieved with the combined use of reagents and a magnetic field. Synergistic effect is observed, which consists in increasing their effectiveness. This made it possible to conclude that this method can be applied to reduce the consumption of reagents used in oil production while maintaining the treatment efficiency. При первичной подготовке нефти, газа и воды возникают осложнения, связанные с наличием стойких водонефтяных эмульсий, вызывающих рост давления жидкости в системах сбора, порывы коллекторов, а также затруднения сепарации газа и предварительный сброс воды на установке предварительного сброса (УПС). Дополнительные проблемы возникают при транспортировке высокопарафинистых нефтей, связанные с кристаллизацией парафина в проточной части нефтепромыслового оборудования и на внутренней поверхности труб, приводящие к падению производительности магистралей. При первичной подготовке нефти, газа и воды возникают осложнения, связанные с наличием стойких водонефтяных эмульсий, вызывающих рост давления жидкости в системах сбора, порывы коллекторов, а также затруднения сепарации газа и предварительный сброс воды на установке предварительного сброса (УПС). Дополнительные проблемы возникают при транспортировке высокопарафинистых нефтей, связанные с кристаллизацией парафина в проточной части нефтепромыслового оборудования и на внутренней поверхности труб, приводящие к падению производительности магистралей. В статье рассмотрена технология магнито-реагентной обработки водонефтяных сред, позволяющая интенсифицировать процессы первичной подготовки нефти на объектах ее добычи. Проведенные стендовые и опытно-промышленные испытания показали способность магнитного поля ускорять процессы деэмульсации нефти, увеличивая процент отделившейся воды при последующем отстаивании, и уменьшать асфальтосмоло­парафиновые отложения (АСПО) на внутренней поверхности нефтегазопромыслового оборудования. Описан механизм действия магнитного поля на водонефтяные среды. Изучено влияние обработки на целостность бронирующих оболочек водонефтяных эмульсий. Исследованы различные режимы магнитной обработки с точки зрения оценки ее эффективности. Показано, что наилучший эффект достигается при совместном использовании реагентов и магнитного поля. Наблюдается синергетический эффект, заключающийся в повышении их эффективности. Это позволило сделать вывод о возможности использования данного метода для сокращения расхода используемых в нефтедобыче реагентов при сохранении эффективности обработки

30 December 2022 in Journal of Mining Institute
Verified
Journal Article
Open access
PDF file
NSNikita О. Shaposhnikov
Nikita О. Shaposhnikov
IGIvan A. Golubev
Ivan A. Golubev
SKSvyatoslav V. Khorobrov
Svyatoslav V. Khorobrov
AKAlexander I. Kolotiy
Alexander I. Kolotiy
AIAndrey V. Ioffe
Andrey V. Ioffe
VRViktor А. Revyakin
Viktor А. Revyakin
The problem of selecting a method for ensuring the reliability of the unprepared fluid transport facilities of an unprepared fluid in the presence of carbon dioxide is considered. Carbon dioxide corrosion is one of the dangerous types of damage to field and main pipelines. It has been shown that dynamic autoclave tests should be carried out during staged laboratory tests in order to determine the intensity of carbon dioxide corrosion and to select the optimal method of protection. A hypothesis about the imperfection of the existing generally accepted approaches to dynamic corrosion testing has been put forward and confirmed. A test procedure based on the use of an autoclave with an overhead stirrer, developed using elements of mathematical modeling, is proposed. The flows created in the autoclave provide corrosive wear of the sample surface similar to the internal surfaces elements wear of the pipelines piping of gas condensate wells. The autoclave makes it possible to simulate the effect of the organic phase on the flow rate and the nature of corrosion damage to the metal surface, as well as the effect of the stirrer rotation speed and, accordingly, the shear stress of the cross section on the corrosion rate in the presence/absence of a corrosion inhibitor. The given results of staged tests make it possible to judge the high efficiency of the developed test procedure.

14 October 2019 in E3S Web of Conferences
Verified
Conference Paper
Open access
PDF file
IGI.A. Golubev
I.A. Golubev
ALA.B. Laptev
A.B. Laptev
EAE.L Alekseeva
E.L Alekseeva
NSN.O. Shaposhnikov
N.O. Shaposhnikov
APA.M. Povyshev
A.M. Povyshev
MKM.K. Kurakin
M.K. Kurakin
The article considers the possibility of increasing the efficiency of chemical reagents by treating inhibited solutions with a magnetic field. It is shown that a various method for generating the magnetic field has a different effect (Some positive some negative). The best results can be achieved with anti-scale magnetic treatment using permanent magnets. Modified inhibitors (after magnetic treatment) have enhanced protective effectby their adsorption capacity with respect to metal increases.

21 April 2024 in Izvestiya. Ferrous Metallurgy
Verified
Journal Article
Open access
PDF file
ARA. S. Rovbo
A. S. Rovbo
IGI. A. Golubev
I. A. Golubev
NSN. O. Shaposhnikov
N. O. Shaposhnikov
APA. V. Penigin
A. V. Penigin
AFAleksandr Fedorov
Aleksandr Fedorov
The article is devoted to the study of dependence of carbon dioxide corrosion rate on the microstructure of material design of the pipeline for CO2 transport and injection. Today there is a task of choosing such material design. For pipeline construction the most cost-effective materials are carbon steels, but for their application it is necessary to pay increased attention to the problem of carbon dioxide corrosion, which is intensified in wet, undrained CO2 flows. At the same time, the choice of material should be made reasonably, taking into account the balance between corrosion resistance, mechanical characteristics and economic aspect of the issue. In this paper, the influence of microstructural state features on the corrosion rate of low-alloy mild steels for CO2 transport and injection was investigated. The authors studied the features of steels with ferritic-bainitic, bainitic-ferritic-perlitic and ferritic-perlitic microstructures. Tests on corrosion resistance were carried out on the bench autoclave complex, which allows to recreate conditions of high pressure and temperature and to simulate real environments. It was determined that the microstructural state of steel has a significant effect on the corrosion rate, which increases with increasing volume fraction of pearlite. Understanding the relationship between the microstructural characteristics of steels and corrosion rates can simplify material selection for infrastructure facilities and contribute to more efficient and reliable use of low-alloy carbon steels in carbon capture, use, and storage projects. This study will be useful in selecting favorable microstructures for low-alloy mild steels that can be used for CCUS (Carbon Capture, Use and Storage) infrastructure projects.

28 September 2022 in Materials
Verified
Journal Article
Open access
PDF file
PKPavel Kruk
Pavel Kruk
IGIvan Golubev
Ivan Golubev
NSNikita Shaposhnikov
Nikita Shaposhnikov
JSJulia Shinder
Julia Shinder
DKDmitry Kotov
Dmitry Kotov
Existing approaches to assessing the reliability and safe operation of downhole equipment provide for assessing only the direct impact of erosion and corrosion processes on the degradation of the material. At the same time, the influence of downhole equipment operating modes on the intensity of corrosion and erosion processes is not evaluated. The necessity of using inflow control devices is shown. The necessity of selecting inflow control devices for specific operating modes of the well is highlighted in order to avoid increased erosion wear due to increased sand production. In this article, a series of studies was conducted to assess the influence of the hydrodynamic characteristics of the fluid flow, which vary depending on the operating modes of the nozzle-type inflow control device, on corrosion processes in the well. It was shown that the level of wall shear stress (WSS) of the base pipe, immediately after the flow control device in the direction of fluid flow, affects the intensification of corrosion processes in downhole equipment. Studies of WSS on the pipe wall were carried out using a dynamic autoclave and elements of mathematical modeling. The design factors (the angle of inclination of the main hydraulic channel of the inflow control device relative to the base pipe) affecting the change in tangential stresses on the wall of the base pipe were investigated. The mechanism of corrosion wear of the base pipe was revealed.

27 June 2020 in Геология и геофизика Юга России
Verified
Journal Article
Closed access
ИГИ.а. Голубев
И.а. Голубев
ИСИ.к. Супрун
И.к. Супрун
Одной из актуальных задач, связанных с улучшением здоровья населения, является возможность потребления воды, по показателям качества, соответствующей нормативам на питьевую воду. Вместе с тем, по данным ВОЗ только 1% воды из источников питьевого и рыбохозяйственного назначения на Земле пригоден для использования без предварительной подготовки. Во всех остальных случаях очистка воды, включающая её обеззараживание, просто необходима. В зависимости от физико-химического состава воды и её микробиологических загрязнений выбирается та или иная технология водоподготовки.Цель работы.В этой связи, на объектах водоподготовки всё более необходимым является включение в технологическую схему новых инновационных решений, которые не предусматривают полную реконструкцию существующих систем, а позволяют эффективно модернизировать уже имеющиеся. Одним из наиболее перспективных решений в этом направлении могло бы явиться применение методов обработки воды магнитно-реагентным способом.Методы исследования.Предложена технология магнитно-реагентной обработки воды, позволяющая интенсифицировать этап реагентного осветления, без существенных затрат на реконструкцию объекта. Опытные испытания на станции водоподготовки позволили установить, что магнитная обработка увеличивает скорость коагуляции взвесей, снижает требуемое время пребывания воды в осветлителе, сокращает расход реагентов на 25-30%.Результаты работы.В статье рассмотрена основная проблема классической системы водоподготовки, связанная с большим расходом реагентов и необходимостью систематического подбора оптимальной дозировки под изменяющиеся параметры среды. Показано, что предлагаемая технология может рассматриваться как в качестве модернизации существующих станций водоподготовки работающих по типовой схеме, так и при проектировании новых объектов. Вне зависимости от сложности применяемых для очистки поверхностных вод технологий в начальной стадии очистки, как правило, используется метод отстаивания, осуществляемый путем введения в воду коагулирующих реагентов для формирования флокул, в которые входят извлекаемые из воды загрязнения. Несмотря на высокую эффективность, применение данного метода сопряжено, как с расходом дорогостоящих реагентов, так и с необходимостью осуществления постоянного контроля за их дозировками, что объясняется непрерывными изменениями показателей качества поверхностных вод по сезонам года One of the urgent tasks associated with improving public health is the possibility of water consumption, in terms of quality, consistent with drinking water standards. At the same time, according to WHO, only 1% of water from drinking and fishery sources on Earth is suitable for use without prior preparation. In all other cases, water treatment, including its disinfection, is simply necessary. Depending on the physicochemical composition of the water and its microbiological contaminants, one or another water treatment technology is selected.Aim.In this regard, at water treatment facilities, it is increasingly necessary to include new innovative solutions in the technological scheme that do not provide for the complete reconstruction of existing systems, but allow for the effective modernization of existing ones. One of the most promising solutions in this direction could be the use of methods for treating water with a magnetic reagent method. Methods.The technology of magnetic reagent water treatment is proposed, which allows to intensify the reagent clarification stage, without significant costs for the reconstruction of the facility. Experimental tests at the water treatment station made it possible to establish that magnetic treatment increases the coagulation rate of suspensions, reduces the required residence time of water in the clarifier, and reduces the consumption of reagents by 25-30%.Results.The article considers the main problem of the classical water treatment system associated with a high consumption of...