Group for Molecular Engineering of Functional Materials, Institute of Chemical Sciences and Engineering, École Polytechnique Fédérale de Lausanne (EPFL), CH-1951 Sion, Switzerland
Auto-generated profile, based on publicly available information
Kyung Taek Cho
Group for Molecular Engineering of Functional Materials, Institute of Chemical Sciences and Engineering, École Polytechnique Fédérale de Lausanne (EPFL), CH-1951 Sion, Switzerland
Perovskite solar cells (PSCs) have experienced an outstanding advance in power conversion efficiency (PCE) by optimizing the perovskite layer morphology, composition, interfaces, and charge collection efficiency. To enhance PCE, here we developed a new method i.e., engineering a compositional gradient thinly at the rear interface between the perovskite and the hole transporting materials. We demonstrate that charge collection is improved and charge recombination is reduced by formation of an engineered passivating layer, which leads to a striking enhancement in open-circuit voltage (VOC). The passivation effect induced by constructing an additional FAPbBr3−xIx layer on top of the primary (FAPbI3)0.85(MAPbBr3)0.15 film was proven to function as an electron blocking layer within the perovskite film, resulting in a final PCE of 21.3%. Our results shed light on the importance of the interfacial engineering on the rear surface of perovskite layers and describe an innovative approach that will further boost the PSC efficiency.
Through judicious molecular engineering, novel dopant-free star-shaped D–π–A type hole transporting materials coded KR355, KR321, and KR353 were systematically designed, synthesized and characterized. KR321 has been revealed to form a particular face-on organization on perovskite films favoring vertical charge carrier transport and for the first time, we show that this particular molecular stacking feature resulted in a power conversion efficiency over 19% in combination with mixed-perovskite (FAPbI3)0.85(MAPbBr3)0.15. The obtained 19% efficiency using a pristine hole transporting layer without any chemical additives or doping is the highest, establishing that the molecular engineering of a planar donor core, π-spacer and periphery acceptor leads to high mobility, and the design provides useful insight into the synthesis of next-generation HTMs for perovskite solar cells and optoelectronic applications.
3 January 2020 in Journal of Materials Chemistry A
Surface passivation of the perovskite photo absorber is a key factor to improve the photovoltaic performance. So far robust passivation strategies have not yet been revealed. Here, we demonstrate a successful passivation strategy which controls the Fermi-level of the perovskite surface by improving the surface states. Such Fermi-level control caused band-bending between the surface and bulk of the perovskite, which enhanced the hole-extraction from the absorber bulk to the HTM side. As an added benefit, the inorganic passivation layer improved the device light stability. By depositing a thick protection layer on the complete device, a remarkable waterproofing effect was obtained. As a result, an enhancement of VOC and the conversion efficiency from 20.5% to 22.1% was achieved. We revealed these passivation mechanisms and used perhydropoly(silazane) (PHPS) derived silica to control the perovskite surface states.