23 August 2018 in IEEE Transactions on Wireless Communications
Massive MIMO is attractive for wireless information and energy transfer due to its ability to focus energy towards desired spatial locations. In this paper, the overall power transfer efficiency (PTE) and the energy efficiency (EE) of a wirelessly powered massive MIMO system is investigated where a multiantenna base-station (BS) uses wireless energy transfer to charge single-antenna energy harvesting users on the downlink. The users may exploit the harvested energy to transmit information to the BS on the uplink. The overall system performance is analyzed while accounting for the nonlinear nature of practical energy harvesters. First, for wireless energy transfer, the PTE is characterized using a scalable model for the BS circuit power consumption. The PTE-optimal number of BS antennas and users are derived. Then, for wireless energy and information transfer, the EE performance is characterized. The EE-optimal BS transmit power is derived in terms of the key system parameters such as the number of BS antennas and the number of users. As the number of antennas becomes large, increasing the transmit power improves the energy efficiency for moderate to large number of antennas. Simulation results suggest that it is energy efficient to operate the system in the massive MIMO regime.
1 September 2025 in IEEE Journal of Selected Topics in Electromagnetics, Antennas and Propagation
Integrated sensing and communication (ISAC) is an emerging technology that can enable future wireless communication networks to also provide wireless sensing services, thus enabling smart cities, homes, and factories that will transform the businesses and societies of the future. In this article, an overview of ISAC is presented, considering the ongoing standardization and research activities while emphasizing the industrial outlook. First, we provide a brief introduction to ISAC fundamentals, including the sensing configurations used in classical radar-like sensing. This is complemented by a description of the major use cases of ISAC, appreciating the interplay between ISAC and emerging technologies such as digital twins and artificial intelligence. To facilitate a smooth integration of sensing into the cellular ecosystem, the key design considerations for the physical layer and spectrum aspects are outlined. Furthermore, the key technology gaps and challenges in integrating sensing functionalities into current wireless communication networks are identified. Finally, we dive deeper into some innovative research directions for ISAC—such as novel antenna design, sensing-aware beam manipulation, waveform design, reconfigurable intelligent surfaces, wavefront engineering, and near-field communications—while highlighting their relevance for future wireless networks.
26 May 2025 in IEEE Communications Standards Magazine
Zero-energy devices, also known as Ambient power-enabled Internet of Things (A-IoT) devices, rely on harvesting ambient energy to operate. These self-sustainable devices do not need manual battery recharging or replacement, making them easy to maintain. A-IoT can address new Internet of Things (IoT) use cases within the cellular ecosystem which the existing cellular IoT technologies were not designed for. To address these use cases, a technical study was conducted by the Third Generation Partnership Project (3GPP) in Release 19 to identify the challenges and develop solutions for a new cellular radio access technology for A-IoT devices that can be deployed in 5G New Radio (NR) spectrum using or coexisting with existing NR network infrastructure. The key challenges for cellular A-IoT devices include low power budget, intermittent energy availability, limited synchronization and computational capabilities due to simplified hardware, and coexistence with NR. In this paper, the 3GPP standardization work on A-IoT is reviewed, with a focus on the physical layer aspects considered in the aforementioned Release 19 study. First, the nomenclature for A-IoT device types, architectures, and deployment scenarios is summarized. This is complemented by a description of the A-IoT physical layer design for downlink and uplink, including aspects such as physical channels, waveform, modulation, coding, preamble, and multiple access. The issues related to coexistence of A-IoT and NR are also outlined. A brief discussion on the upcoming 3GPP A-IoT standardization work concludes the paper.