10 March 2021 in Nano Letters
2 August 2021 in Applied Physics Letters
The increasing availability of a variety of two-dimensional materials has generated enormous growth in the field of nanoengineering and nanomechanics. Recent developments in thin film synthesis have enabled the fabrication of freestanding functional oxide membranes that can be readily incorporated in nanomechanical devices. While many oxides are extremely brittle in bulk, recent studies have shown that, in thin membrane form, they can be much more robust to fracture as compared to their bulk counterparts. Here, we investigate the ultimate tensile strength of SrTiO3 membranes by probing freestanding SrTiO3 drumheads using an atomic force microscope. We demonstrate that SrTiO3 membranes can withstand an elastic deformation with an average strain of ∼6% in the sub-20 nm thickness regime, which is more than an order of magnitude beyond the bulk limit. We also show that these membranes are highly resilient upon a high cycle fatigue test, surviving up to a billion cycles of force modulation at 85% of their fracture strain, demonstrating their high potential for use in nanomechanical applications.
22 October 2023 in Advanced Functional Materials
Substrates are essential in thin‐film deposition, yet they do not always meet the requirements of a given application. For example, they might be prohibitively expensive or not even available with the necessary crystal lattice structures. This paper introduces the innovative concept of “vector substrates,” where the template layer for thin‐film growth, referred to as vector, is chemically and crystallographically independent of the bulk of the substrate. This approach reduces material costs and offers unparalleled flexibility. The fabrication of vector substrates leverages thin‐film membrane technology. The process begins by growing a template layer on a parent substrate. The template layer is then transferred onto a carrier substrate, thereby generating the vector substrate. Vector substrate technology enables researchers and manufacturers with thin‐film deposition facilities to fabricate optimized substrates that would otherwise be difficult to obtain using bulk single‐crystal growth technology. An in‐depth discussion of the benefits and limitations of vector substrates compared with traditional substrates is provided. Furthermore, the practical viability of the concept is demonstrated by fabricating sets of vector substrates. Although this concept is still in its infancy, it has a significant potential to complement conventional substrates for future advancements in substrate technology and thin‐film deposition.
1 September 2024 in APL Materials
Superconducting films of α-Ta are promising candidates for the fabrication of advanced superconducting qubits. However, α-Ta films suffer from many growth-induced structural inadequacies that negatively affect their performance. We have therefore explored a new synthesis method for α-Ta films, which allows for the growth of these films with an unprecedented quality. Using this method, high quality α-Ta films are deposited at a comparably high substrate temperature of 1150 °C. They are single-phase α-Ta and have a single out-of-plane (110) orientation. They consist of grains ≥2 μm that have one of three possible in-plane orientations. As shown by scanning transmission electron microscopy and electron energy loss studies, the substrate–film interfaces are sharp with no observable intermixing. The obtained insights into the epitaxial growth of body-centered-cubic films on quasi-hexagonal substrates lay the basis for harnessing the high structural coherence of such films in various applications.
12 August 2024 in Nano Letters