28 December 2023 in Journal of the American Chemical Society
Controlling multimetallic ensembles at the atomic level is significantly challenging, particularly for high-entropy alloys with more than five elements. Herein, we report an innovative ultrasmall (∼2 nm) PtFeCoNiCuZn high-entropy intermetallic (PFCNCZ-HEI) with a well-ordered structure synthesized by using the space-confined strategy. By exploiting these combined metals, the PFCNCZ-HEI nanoparticles achieve an ultrahigh mass activity of 2.403 A mgPt-1 at 0.90 V vs reversible hydrogen electrode for the oxygen reduction reaction, which is up to 19-fold higher than that of state-of-the-art commercial Pt/C. A proton exchange membrane fuel cell assembled with PFCNCZ-HEI as the cathode (0.03 mgPt cm-2) exhibits a power density of 1.4 W cm-2 and a high mass-normalized rated power of 45 W mgPt-1. Furthermore, theoretical calculations reveal that the outer electrons of the non-noble-metal atoms on the surface of the PFCNCZ-HEI nanoparticle are modulated to show characteristics of multiple active centers. This work offers a promising catalyst design direction for developing highly ordered HEI nanoparticles for electrocatalysis.
10 May 2023 in Journal of the American Chemical Society
7 April 2025 in Nature Communications
Developing highly active, low-cost, and durable catalysts for efficient oxygen reduction reactions remain a challenge, hindering the commercial viability of proton exchange membrane fuel cells (PEMFCs). In this study, an ordered PtZnFeCoNiCr high-entropy intermetallic electrocatalyst with Pt antisite point defects (PD-PZFCNC-HEI) is synthesized. The electrocatalyst shows high mass activity of 4.12 A mgPt-1 toward the oxygen reduction reaction (ORR), which is 33 times that of the commercial Pt/C. PEMFC, assembled with PD-PZFCNC-HEI as the cathode (0.05 mgPt cm-2), exhibits a peak power density of 1.9 W cm-2 and a high mass activity of 3.0 A mgPt-1 at 0.9 V. Theoretical calculations combined with in situ X-ray absorption fine structure results reveal that defect engineering optimizes Pt’s electronic structure and activates non-noble metal site active centers, achieving exceptionally high ORR catalytic activity. This study provides guidance for the development of nanostructured ordered high-entropy intermetallic catalysts.
1 April 2020 in Journal of Energy Chemistry
9 June 2018 in Journal of Materials Chemistry A
The lack of high-performance cathode materials is a great challenge for the development of large-scale energy storage sodium ion batteries. Here, a new resource-rich P2-type Na0.44Mn0.6Ni0.4−xCuxO2 (0 ≤ x ≤ 0.3) sodium-ion battery (NIBs) cathode material was designed and synthesized by a sol–gel method. Na ions occupy the Naf sites and the Nae sites in a proportion of 1 : 1, which maintains the high symmetry and stability of the P2-type structure. The charging/discharging tests show that Na0.44Mn0.6Ni0.3Cu0.1O2 has a high initial capacity of 149 mA h g−1 and 80% capacity retention after 50 cycles at 0.1C, showing a high energy density of 469 W h kg−1. The addition of inactive copper enhances the lattice spacing, obviously reducing the irreversible reaction resistance (Rf) during the intercalation and deintercalation of Na+, thereby reducing the internal resistance of the battery and improving the cycle performance. In order to maintain the P2-type structure, the voltage is controlled at 1.5–4.0 V during charging and discharging, which inhibits the phase transition of P2-O2, leading to the improvement of cycling performance. Therefore, the Cu-substituted Na0.44Mn0.6Ni0.3Cu0.1O2 possibly serves as a promising high capacity, high energy density and stable cathode for sodium ion battery applications.
1 August 2019 in Applied Surface Science