1) Water Resources Engineering Research Group, Faculty of Civil and Environmental Engineering, Institut Teknologi Bandung, Bandung, 40132, Indonesia. 4) Water Resources Development Center, Institute of Technology Bandung, Indonesia Institut Teknologi Bandung, Bandung, 40132, Indonesia
Auto-generated profile, based on publicly available information
Arno Adi Kuntoro
1) Water Resources Engineering Research Group, Faculty of Civil and Environmental Engineering, Institut Teknologi Bandung, Bandung, 40132, Indonesia. 4) Water Resources Development Center, Institute of Technology Bandung, Indonesia Institut Teknologi Bandung, Bandung, 40132, Indonesia
On September 28, 2018, an earthquake with a magnitude of 7.4 Mw struck Central Sulawesi, Indonesia and triggered a major tsunami. At least 3475 people lost their lives as reported by the Indonesian National Board for Disaster Management (BNPB), while a large unknown number is still buried under the rubble and presumed dead. This event also damaged the facilities and infrastructure of the Palu City coastal area. Currently, The Government of Palu is developing the Palu Special Economic Zone (PSEZ) in Tawaeli District, Palu, Central Sulawesi to attract investors and spur economic growth in neighbouring areas. Thus, mitigation plans are urgently needed to reduce damage and losses due to the impact of future tsunamis on PSEZ. This study assesses the impact of tsunamis around the Palu Special Economic Zone and its supporting infrastructure. Hypothetical earthquake-induced tsunamis were simulated using Delft3D and DelftDashboard. The fault scenario is developed based on data from PUSGEN. Further parameters were developed with the empirical earthquake source-scaling laws. The model simulates the tsunami generation, propagation, and inundation from the source to the coastal area. A tsunami impact scenario is then developed as a basis for analysing the business impact to the transportation infrastructure and critical utilities serving the PSEZ, as well as to the operation of the industries and businesses within the PSEZ. The lessons learned from this study can assist stakeholders in developing an areawide business continuity plan as a commitment of the stakeholders for implementing areawide business continuity management for the PSEZ, which will improve the economic resilience of the Palu City as well as South Sulawesi region.
This paper is the second part of a comprehensive two-part series on the ITB Unit Hydrograph (ITB-UH) Method, titled The ITB Unit Hydrograph Method: A Novel Approach to User-Defined Unit Hydrograph Development. Building on the foundational concepts introduced in Part I, this paper delves into advanced applications of the ITB-UH Method, emphasizing its adaptability, calibration capabilities, and real-world utility. The ITB-UH Method introduces novel derivations for the Peak Rate Factor (Kp) and Peak Discharge (Qp), along with a time-step normalization approach that enables flexible adjustments to unit rainfall durations and a systematic calibration process. These innovations significantly enhance the method’s versatility and accuracy in modeling flood discharge across diverse hydrological conditions. The practical applicability of the ITB-UH Method is demonstrated through real-world flood discharge calculations in the Pinamula River, located in Buol District, Central Sulawesi Province. Three illustrative examples highlight the method’s versatility: (1) analyzing flood hydrographs at a 1-hour time step to showcase its practical applicability for flood management; (2) recalculating flood hydrographs with a finer 0.5-hour time step to demonstrate its adaptability to varying temporal resolutions; and (3) refining model parameters to improve alignment with observed flood hydrographs, underscoring the method’s capacity for calibration and optimization. To evaluate the method’s performance, robust metrics such as the Nash–Sutcliffe Efficiency (NSE), Percentage Bias (PBIAS), and Index of Agreement (IA) are employed. These metrics confirm the ITB-UH Method’s accuracy and reliability, with results consistently aligning closely with observed data. Collectively, the findings underscore the ITB-UH Method’s suitability across diverse hydrological settings and its potential to enhance both the verification of existing SUH methods and the development of user-defined hydrographs. By enabling more accurate and effective flood management, the ITB-UH method represents a significant advancement in hydrological modeling, with broad implications for water resource management and infrastructure planning worldwide. Doi: 10.28991/CEJ-2025-011-05-015 Full Text: PDF
Floods are the most frequent disasters caused by combinations of natural and anthropogenic factors. Given the increasing intensity and frequency of floods, especially in Asian mega-urban regions, effective Disaster Risk Reduction (DRR) strategies are critical. This study presents a comparative evaluation of the national flood risk assessment methods in Indonesia and China, followed by a flood risk map analysis calculated using the Chinese and Indonesian standards for flood risk assessment, specifically for a case study in Bandung City, Indonesia. We found that the Chinese standard method produces a broader spatial identification of high flood risk areas, influenced by rainfall intensity and topography, which better represents pluvial flood risks. Meanwhile, the Indonesian method produces localized high flood risk near rivers, which better represents fluvial flood risks. In the case study of Bandung City, the occurrence of pluvial floods was more dominant than fluvial floods. Therefore, the spatial accuracy of the Chinese method was slightly higher than the Indonesian method. The study emphasizes the importance of a national flood assessment method that balances accuracy, data availability, computational resources, and local/regional characteristics to cope with the increasing risk in urbanized flood-prone areas.
Floods are the dominant color of the interaction of human activities and natural mechanisms that occur every year in the city of Jakarta. Various efforts have been made to reduce flooding in Jakarta, but flooding is still the dominant color, especially on the banks of the Ciliwung River. On the banks of the Ciliwung River, Tebet, Matraman and Jatinegara sub-districts are the three areas that experienced the most severe overflows of the Ciliwung River. Flood mitigation efforts in these three areas have been carried out in the form of increasing the drainage capacity of the Manggarai Gate and normalizing the river in the form of dredging and construction of embankments. However, this effort is not optimal because the implementation of normalization is hampered by social conflicts. This paper discusses mitigation efforts in the form of normalization and combination with retention ponds which are carried out by simulating flooded areas. Completion of the normalization of the Ciliwung River is not the best solution to deal with flooding in Jakarta. The flood volume which usually occupies the flood area flows quickly due to changes in the geometry of the river and causes changes in the hydrograph peak and causes flooding in the downstream part of the study area causing an increase in inundation area in Manggarai up to 200%. On the other hand, the use of retention/storage ponds on limited land has been able to reduce flood inundation by 10%. Therefore, staging in the planning and construction of flood mitigation infrastructure needs to be considered and planned thoroughly.