1 April 2019 in IEEE Journal of Selected Topics in Quantum Electronics
A competitive 300-mm silicon photonics foundry technology has been developed by GLOBALFOUNDRIES for general availability, which takes advantage of advanced CMOS process technology and provides a manufacturing scale. A state-of-the-art process design kit offers a codesign environment with access to a comprehensive photonics device library along with a monolithically integrated SOI CMOS device library. Advances in automated wafer-level optical test enable statistical photonic device characterization for development, photonic modeling, and manufacturing controls. The key challenges and solutions in developing a manufacturable photonic technology with state-of-the-art performance are described, as well as a roadmap for next generation high-performance monolithic silicon photonics are outlined.
1 May 2014 in Optics Express
We demonstrate novel polarization management devices in a custom-designed silicon nitride (Si3N4) on silicon-on-insulator (SOI) integrated photonics platform. In the platform, Si3N4 waveguides are defined atop silicon waveguides. A broadband polarization rotator-splitter using a TM0-TE1 mode converter in a composite Si3N4-silicon waveguide is demonstrated. The polarization crosstalk, insertion loss, and polarization dependent loss are less than −19 dB, 1.5 dB, and 1.0 dB, respectively, over a bandwidth of 80 nm. A polarization controller composed of polarization rotator-splitters, multimode interference couplers, and thin film heaters is also demonstrated.
31 October 2018 in IEEE Journal of Selected Topics in Quantum Electronics
18 December 2014 in IEEE Journal of Selected Topics in Quantum Electronics
We present a 16-Gb/s transmitter composed of a stacked voltage-mode CMOS driver and periodic-loaded reverse biased pn junction Mach-Zehnder modulator. The transmitter shows 9-dB extinction ratio and 10.3-pJ/bit power consumption and operates with 1.3 μm light. Penalties as low as 0.5 dB were seen as compared to a 25-Gb/s LiNbO 3 transmitter with both a monolithic metal-semiconductor-metal receiver and a reference receiver at 16-Gb/s operation. We also present an analytic expression for relative transmitter penalty (RTP), which allows one to quickly assess the system impact of design parameters such as peak-to-peak modulator drive voltage, modulator figure of merit, and transmitter extinction ratio to determine the circumstances under which a stacked CMOS cascode driver is desirable.
6 January 2020 in IEEE Journal of Selected Topics in Quantum Electronics
Interfacing standard optical fibers with high index-contrast photonic waveguides remains a substantial challenge restricting the cost-efficiency and scalability of silicon photonic devices. To address this, we have proposed a mechanically compliant polymer interface, formed of a standard fiber connection and a flexible ribbon with lithographically defined polymer waveguides. Self-aligned mechanical assembly and optical mode evolution designs are employed for low cost and large spectral bandwidth. In this paper, we review our progress leading to the full demonstration of this concept with -1.8 dB peak transmission from a plugged-in standard fiber connector to Si wire waveguides. This with 0.7 dB roll-off on a 100 nm bandwidth and all polarization. We present a comprehensive analysis of loss sources and discuss intermediate results, self-alignment accuracy, and reliability.