1 January 2019 in Complexity
The reheat steam temperature control system of thermal power unit is a complex control object with time‐varying parameters and large delay. In order to achieve precise control of reheat steam temperature, the performance of the reheat temperature control system is analyzed according to the data that are obtained based on the constrained predictive control algorithm. Firstly, the process and mathematical model of reheat steam temperature control system are introduced. Then the principle of constrained predictive control algorithm is analyzed. Finally, the steady‐state values of control quantities of reheat steam temperature control system under different conditions are given by MATLAB simulation, and, by analyzing the steady‐state values and steady‐state time of the input and output of the system, the reference values and the regulating law of the control quantities and the specific constraint range of the control quantities of the system are given, which can provide reference data and theoretical basis for the field adjustment of the reheat steam temperature control system in power plant and improve the safety and effectiveness of the system.
1 January 2019 in Mathematical Problems in Engineering
The welding of the same parts has same welding trajectory, so welding process has strong repeatability. In this paper, aiming at the repeatability of welding process, an iterative learning controller is designed to achieve the control of weld quality. Due to the extremely variable welding environment and the presence of noise interferences and load disturbances, it is easy to cause the jumping change in parameters and even the structure of the welding system. Therefore, the idea of multiple model adaptive control (MMAC) is introduced into iterative learning control (ILC), and a multiple model iterative learning control (MMILC) algorithm is designed according to model of weld pool dynamic process in gas tungsten arc welding (GTAW). Besides, the convergence of the algorithm is analyzed for two cases: fixed parameters and jumping parameters. It turns out that the MMILC can not only utilize the repetitive information effectively in the welding process to achieve high precision tracking control of weld seam in limited time interval, but also realize the multiple model switching according to different working conditions to improve the welding quality.
18 August 2020 in Complexity
In limestone-gypsum wet flue gas desulfurization process, the change process of pH value of slurry in absorption tower is a typical nonlinear system with time delay and various uncertainties, so it is difficult to establish an accurate mathematical model of slurry pH control process. According to the pH control process of the slurry of wet flue gas desulfurization process, a model-free adaptive control algorithm based on compact form dynamic linearization (CFDL-MFAC) is designed to realize the tracking control of the pH value of the slurry. Due to various interference factors in the pH control process of slurry in absorption tower, it is easy to cause jump change of control system parameters and even structure. Therefore, a model-free adaptive control algorithm based on switching strategy is proposed in this paper. According to different working conditions, several model-free adaptive controllers are established. The stability of the algorithm is analyzed for the two cases of fixed system parameters and jumping system parameters. It was found that the model-free adaptive controller based on the switching strategy can switch multiple controllers under the condition of system parameter jump, so as to realize the fast tracking control of the slurry pH value of the system absorption tower under different working conditions. Through this method, the overshoot can be reduced and the control quality can be improved.
8 July 2025 in IEEE Access
Traditional MOT methods often struggle with issues such as occlusions, identity switches, and limited cross-camera trajectory matching accuracy. To overcome these challenges, this paper proposes a modified advanced multiple object tracking (MOT) method based on the CSTrack algorithm, named MACSTrack, which aims to address the competition between detection and re-identification (ReID) tasks in MOT and enhance its applicability to cross-camera scenarios. MACSTrack introduces a reciprocal inhibition network (REIN) to deeply mine and fuse the feature specificity and commonality between detection and ReID tasks, suppressing irrelevant features and enhancing task synergy. An improved scale-aware attention network (ISAAN) is employed to minimize information loss and feature distortion during feature fusion. Furthermore, a hierarchical association method based on ambiguous assignment modeling (HAAM) is proposed to improve the stability and robustness of object tracking in time series. To address the challenge of cross-camera trajectory matching in closed scenes, a two-stage strategy utilizing prior knowledge of the number of individuals is developed, which significantly improves matching accuracy. Experimental results on benchmark datasets demonstrate that MACSTrack outperforms the original CSTrack algorithm and achieves comparable performance to state-of-the-art MOT methods. Specifically, MACSTrack exhibits improvements in key metrics such as MOTA, IDF1, and a substantial reduction in identity switches. The proposed two-stage cross-camera trajectory matching strategy also achieves over 10% higher accuracy compared to conventional methods, highlighting the practicality and effectiveness of the approach.
23 August 2022 in International Journal of Adaptive Control and Signal Processing