Titanium carbide (Ti3C2Tx) MXene has attracted significant attention due to its exceptional properties and versatile solution processibility. However, MXene dispersions are prone to various degradation processes, leading to the formation of byproducts that negatively affect its morphological, electrical, and mechanical properties. Through the years, several methods have been developed to mitigate MXene degradation; however, divergent viewpoints on the understanding of degradation mechanisms are prevalent, hindering the development of versatile strategies in producing environmentally stable MXene dispersions. This review provides a chronological analysis of the research efforts aimed at unraveling the underlying mechanisms of MXene degradation and highlights strategies for circumventing this process. This review discusses apparent inconsistencies in experimental findings and theoretical models. These discrepancies prompt further investigation for a clearer understanding of the degradation process in MXene. This narrative allows readers to follow the evolution of dominant theories and disputes and to ultimately stimulate further investigation, aiming for a better understanding of this process. It is anticipated that identifying the fundamental factors affecting the oxidation of MXene dispersions will enable their full‐scale processing into higher‐order structures and practical devices with greater longevity and long‐term performance.
19 June 2020 in International Journal of Polymer Science
Polyhydroxybutyrate (PHB) is a biopolymer of natural origin, one of the suitable alternatives for synthetic plastics. However, pure PHB has a high production cost, is relatively brittle, and has poor processability, hence its limited application. Combining PHB with biomass fillers and plasticizers can significantly improve the properties of the polymer, leading to its commercial usage. In this study, PHB was incorporated with starch (S) as a cheap biomass filler and lauric acid (LA) as a potential plasticizer. The PHB/S/LA composites were prepared using a modified solvent casting method with the incremental addition of LA. The PHB/S ratio was maintained at a ratio of 80/20 (). Physicochemical characterization via EDS, XRD, and FTIR proved that the composite components have blended through nucleation and plasticization processes. The morphology of the PHB/S blends was found to be a heterogeneous matrix, with decreased inhomogeneity upon the addition of LA in the composite. Thermal characterization done by TGA and DSC showed that the thermal properties of PHB/S films improved with the addition of LA. Mechanical tests (UTM) proved that the elastic strain of the films also increased with the addition of LA, although the tensile strength decreased slightly compared to pure PHB/S. Overall, the results of this study provide baseline information on the improvement of PHB-based bioplastics.
The mutable collagenous tissue (MCT) of sea cucumber, with its ability to rapidly change its stiffness and extensibility in response to different environmental stress conditions, serves as inspiration for the design of new smart functional biomaterials. Collagen, extracted from the body wall of Stichopus cf. horrens, a species commonly found in the Philippines, was characterized for its suitability as stimuli-responsive films. Protein BLAST search showed the presence of sequences commonly found in type VII and IX collagen, suggesting that Stichopus horrens collagen is heterotypic. The maximum transition temperature recorded was 56.0 ± 2 °C, which is higher than those of other known sources of marine collagen. This suggests that S. horrens collagen has better thermal stability and durability. Collagen-based thin films were then prepared, and atomic force microscopy (AFM) imaging showed the visible collagen network comprising the films. The thin films were subjected to thermomechanical analysis with degradation starting at >175 °C. At 100-150 °C, the collagen-based films apparently lose their translucency due to the removal of moisture. Upon exposure to ambient temperature, instead of degrading, the films were able to revert to the original state due to the readsorption of moisture. This study is a demonstration of a smart biomaterial developed from S. cf. horrens collagen with potential applications in food, pharmaceutical, biomedical, and other collagen-based research.
14 January 2026 in Journal of Materials Chemistry A
Ti3C2Tx MXene nanosheets (hereafter "MXene") demonstrate great potential for applications in wearable electronics, sensors, energy storage, biomedical devices, and electromagnetic interference shielding. Their richly functionalized surfaces enable redispersion from water into polar organic solvents, offering flexibility for processing using non-aqueous inks.However, this solvent exchange process, typically achieved through vigorous vortex mixing, reduces the electrical conductivity of the resulting material. While this decrease has been attributed to increased interlayer spacing due to solvent intercalation, we show that mechanical agitation during solvent exchange directly causes sheet damage. Our results indicate that different redispersion conditions produce MXene sheets with varying degrees of damage and oxidation, which in turn lead to decreased conductivity. This drop persists even with volatile solvents and after annealing up to 200 °C. Furthermore, reversing the process by exchanging the organic solvent back to water, thereby restoring the interlayer spacing, still yields lower conductivity than pristine MXene. Collectively, these results indicate that mechanical flake degradation is irreversible.We anticipate that recognizing the critical role of processing-induced damage will guide researchers in developing optimized MXene processing conditions to achieve desired material properties for specific applications.