14 December 2023 in Smart Materials and Structures
Currently, common vibration energy harvesters can only capture vibration energy in a unidirectional or fixed plane, posing issues such as high collection frequency, limited frequency range, and low output power. This paper proposes a multi-directional broadband piezoelectric-electromagnetic-magnetic coupling composite vibration energy harvester. It achieves three-directional energy harvesting while broadening the harvesting frequency and having a higher power density compared to current state-of-the-art research. Comprising a piezoelectric system and an electromagnetic system, the harvester leverages theoretical analysis to design the piezoelectric cantilever beam with a branching structure, enhancing its broad frequency characteristics. In addition, the magnetic coupling effect is added to the device so that the cantilever beam in three directions can work when the device receives unidirectional vibration excitation. Building on theoretical analysis, the COMSOL 5.6 software is utilized to conduct simulation analysis and optimize the size of the designed piezoelectric cantilever beam structure. This process validates theoretical analysis accuracy and improves energy capture capability. To confirm device viability and simulation accuracy, a physical model is fabricated, and vibration tests are executed. The energy harvester generates two peaks (10 Hz, 27 Hz) when vibration excitation is applied, which effectively broadens the collection frequency. Under the vibration frequency excitation in the X and Y directions, the total composite output power of the multidirectional broadband piezoelectric-electromagnetic-magnetic coupling composite vibration energy harvester is 17.72 mW and 30.22 mW, and the power density can reach 32.85 mW·cm−3, which significantly strengthened the captured energy efficiency of the energy harvester compared with the energy harvester without magnetic coupling, with the total composite output power increased by 352.0% and 165.8%, respectively; under the excitation of the Z-direction vibration frequency, the total composite output power was 42.42 mW and 44.80 mW, and the power density could reach 48.70 mW·cm−3.
1 March 2024 in Engineering Research Express
Existing magnetically driven soft robots mainly rely on external electromagnetic, leading to a substantial energy consumption due to the requirement of a large external magnetic field. Moreover, the precise control of these soft robots relies on electric current, making them highly susceptible to disturbances and deviations induced by minute variations in the current. To overcome these challenges, we propose and evaluate a novel approach employing a miniature walking soft robot empowered by its internal electromagnets. The overall robot size is 18 mm × 6 mm × 12 mm (length × height× width). This design enables the robot to achieve precise and stable motion using a 240-mA current with a 6 V low voltage. In addition, the incorporation of specially designed sheet-leg mechanism with varying degrees of friction facilitates the transformation of linear motion into an effective forward gait. This paper outlines the principles and control strategies of the robot, illustrates the robot fabrication process, at the same time verifies the structural integrity through experimental validation. Further evaluations include comprehensive analysis of the robot’s gait and speed. The results show that the robot attains a speed of 2.86 mm s–1. This study marks a stride towards the realization of a fully autonomous, unrestrained, cost-effective, and energy-conserving magnetic soft robot.