Bis(3-triethoxysilylpropyl)tetrasulfide (TESPT) was found to affect the curing characteristics and the physical properties of styrene-butadiene (SBR) gum rubber and xin situ silica-filled SBR vulcanizates. Silica incorporated by the in situ sol-gel reaction of tetraethoxysilane with TESPT showed a much higher reinforcing efficiency than did conventional mechanical mixing and the in situ method without TESPT. The higher reinforcing efficiency is attributed to the formation of a silica-rubber network, which also changed the dynamic mechanical behavior of the SBR vulcanizates. Transmission electron microscopy observations showed in situ silica incorporation of very fine particles in comparison to the sol-gel process without TESPT.
Lignocellullosic materials have been used as low-cost adsorbents for the removal of methylene blue (MB) and malachite green (MG) dyes from aqueous solutions. The organic compounds in the adsorbents that contribute to chemical oxygen demand (COD) have been removed through pretreatment of the adsorbents. The percentage of color removal and COD reduction of both MB and MG dyes were found relatively close in values. The adsorption process followed the Langmuir isotherm as well as the Freundlich isotherm and pseudo-second order kinetic model. The process was found to be endothermic in nature.
30 July 2013 in Journal of Applied Polymer Science